China Multi-stage Pump,Multi-stage Pump Manufacturer
Micro Pump
(12)
Wilo Pump
(12)
Vacuum Pump
(34)
Submerged Pump
(13)
Centrifugal Pump
(31)
Screw Pump
(25)
Chemical Pump
(16)
Sewage Pump
(32)
Multi-stage Pump
(20)
Metering Pump
(19)
Oil Pump
(22)
Self-sucking Pump
(12)
Fire Pump
(25)
Diaphragm Pump
(22)
Submersible Pump
(31)
Vertical Pump
(21)
Reciprocating Pump
(22)
Magnetic Pump
(24)
Fluoroplastic Pump
(21)
Air Pump
(20)
Water Pump
(22)
Compressor Valve
(39)
Spring
(226)
Product Description
CDLK/CDLKF is used for conveying cooling liquid, lubricating liquid and condensation water of machine tools, industrial cleaning equipment or other cases that application of immerged pump is suitable, and is applicable to various temperature, flow and pressure ranges. CDLKF is applicable to low-corrosive liquid.
Concretely, it is applicable to electric spark., lathe, grinding machine, processing center, cooling devices, industrial cleaning equipment, filtering system etc.
Operation conditions
Thin, clean non-explosive liquid without solid grains and fibers; Can be used for conveying of water, cooling water solution and cutting lubricating liquid.
Pump
CDLK/CDLKF is non-self priming multi-stage centrifugal pump installed with standard motor. The motor shaft is directly connected with the pump shaft through toupling. According to the requirement, the pump can be equipped with intelligent protector, which effectively protects pump from dry rotation, phase lack, overload etc. In order to meet the requirement of installation depth of the water tank or vessel, it is possible to install cavity body for changing length of the pump. Length for different number of stages is shown in the dimensions & weight table and the table of products supplying scope.
Motor
The motor is fully-sealed, air cooling standard motor 2 poles
Protection class: IP55
Insulation class: F
Motors for other voltages can be supplied according to the requirement.
Single phase motors with 0.37~2.2KW are available.
Max ambient temperature
When the pump operates under ambient temperature higher than 40 or under altitude higher than 1000m, because of low air density and poor cooling effects, the motor output power P2 will be decreased to certain extent. If the pump is operated under the above-said conditions, ir should be equipped with motor of higher power.
Product Power: 0.37-18.5kw
