February 28, 2021

High Quality Colorful 3D Carbon Fiber Sticker (SCF120)

  • Model NO.: SCF120
  • Material: PVC
  • Thicknees: 120 Mircon
  • Standard Width: 1.52 M
  • Trademark: Sounda
  • Origin: Shanghai
  • Type: Letter
  • Sticker Use: Body Stickers
  • Liner Paper: 140G/M2
  • Length: 50 M
  • Specification: Color Available 7 colors
  • HS Code: 3919909000
Raw Materials:

1) Flexible monomeric PVC film with 3D texture.
2) Low tack solvent acrylic glue.
3) PE coating paper.


1) Very light, thin, but with excellent ductility and flexibility.
2) 3D graphic contrast, hi-touch embossed finish, 3D-Effect, very stylish!
3) High weather resistance to (acid rain, hailstone, heavy snow, sandstorm, etc).
4) Water proof, UV and FR.
5) Seamless for whole car wrapping.
6) Can be applied to all the common car paints.
7) The film is embossed, resembling. Reflect lights as your expectation and change highlights of the Pattern depending on the viewing angle.
8) Easy to clear with soap and water.
9) Air bubble removal. Can be dry paste!
10) High stretchable ability. Easy to apply on any surface.
11) Filter harmful light ray.


1) Car decoration: Can be dressed up car engine hood, steering wheel, empennage, trunks, any interior and Exterior surfaces of a car. Excellently meeting your expectation of unique decoration
2) Change the color of your car in 2 days completely.
3) Used for wrapping laptop, iPad, mobile.
4) Motorcycle decoration.

Installation Tips:

1) Clean the area thoroughly. Measure and place the sticker in the desired location. Put a piece of masking tape On the sticker to hold it in place. Hint: For best results do not install the sticker in extreme heat or cold. Surface Contaminants will cause imperfections.
2) Lift the sticker up and peel the white paper backing off the sticker. Be careful not to pull the masking tape off.
3) Slowly lower the sticker and rub it in place with a scratch board or similar item. Hints: Using a soft rubber Squeegee will help smooth out bubbles and wrinkles
4) Wait a few minutes then slowly peel the clear cover off at an angle. Be very careful not to pull the sticker off The surface. If the sticker pulls away from the surface repeat step 3.
Item Face Film(micron) Adhesive Release Paper(g/sqm) Width(m) Length(m)
SCF120 120 transparent,polyacrylate,removable 140 1.52 50
SCF120A 120 transparent,polyacrylate,removable 140 1.52 50
SCF120MT(metal) 120 transparent,polyacrylate,removable 140 1.52 50
CWV1200 90 transparent,polyacrylate,removable 140 1.52 50
CWV1200SP(Sparkle) 90 transparent,polyacrylate,removable 140 1.52 50
Physical Properties:
life durability 5~7 years
Face Film high flexible polymeric PVC film
Glue thickness 30um
Glue with air channels, transparent, polyacrylate, removable from Taiwan
Release Paper With air channels,one sidesiliconized paper 140g
Adhesive power(of FINAT-FTM1, after 24 hours) 16H/25mm
Heat temperature 180°C
Temperature resistance From -30°C to +250°C
Laceration reluctance(DIN EN ISO 527) Longitudinally min 150% across min 19 Mpa
Film Style With air channels, air bubble free

Explosion-Proof Electric Hoist

Maximum Load:1000-100,0000kg

As a world`s leading Crane manufacture and service provider, we fit out our factory with first-rate manufacturing equipment, in addition to recruiting a team of ecperienced employees with great expertise. Hence we can ensure that every product products is completed to a high level of safety, reliability and quality. There are a full range of explosion-proof, spark-resistant electric chain hoists in our company that meet the latest explosion protection standards. Our products have been widely used in the food, chemical, and petroleum and natural gas industries as well as in any other potentially explosive environment.

We strictly follow the related ATEX 100a (94/90/CE) directives and CE directives in making qualified chain hoist that can be used in Zone1, Zone 2, Zone 21, and Zone 22 areas as classified in the ATEX directives.


  •       Explosion proof classification: EEx de IIB T4
  •       Standard lifting height: 3m
  •       One speed for lifting motion, or optional two speed for lifting motion 
  •       One speed for trolley travel, or optional two speed for trolley travel
  •       Degree of protection for motor: IP55
  •       Load moment limiter
  •       Pendant control station that contains an emergency stop button

Optional Configurations:

  •       Explosion proof classification: EEx de IC T4
  •       Upper Limit and lower limit switch
  •       Platform trolley that provides shorter headroom
  •       Remote control system
  •       Higher degree of protection
  •       Fire-resistant function: copper hook, copper lift wheel, anti-derail copper roller
  •       Anti-rotation hook

Explosion Proof Electric Hoist

Explosion Proof Electric Hoist,Electric Wire Rope Hoist,Proof Lifting Hoist,Explosion-Proof Electric Wire

Eurocrane (China) Co., Ltd. , https://www.craneparts.pl