As the gear pump shaft extension spline and gearbox output shaft Huacao effective contact length is short, while the gear pump torque transmission work is large, the spline to withstand large torque squeeze wear and tear or rolling key, resulting in huge heat , Resulting in skeleton oil seal rubber lip burn, aging, resulting in channeling oil. It is recommended that OEMs use gear pumps to check the spline strength of the gear pump shaft to ensure sufficient effective contact length. Because the shaft diameter of the gear shaft and the clearance of the inner hole of the seal ring are small, larger solid particles in the oil enter between them, resulting in the abrasion of the inner hole of the seal ring, scratching or rotation with the shaft, causing the pressure oil of the secondary seal to enter the low pressure zone Skeleton seal), resulting in seal breakdown, this time should be filtered or replaced with new anti-wear hydraulic oil. Because the shaft diameter of the gear shaft and the clearance of the inner hole of the seal ring are small, larger solid particles in the oil enter between them, resulting in the abrasion of the inner hole of the seal ring, scratching or rotation with the shaft, causing the pressure oil of the secondary seal to enter the low pressure zone Skeleton seal), resulting in seal breakdown, this time should be filtered or replaced with new anti-wear hydraulic oil. When the host load working time is too long and the fuel tank surface is low, the oil temperature can be increased to 100 ℃, resulting in thinning oil, aging oil seal lips, resulting in channeling oil; should be checked regularly fuel tank level, Avoid excessive oil temperature. Gear pump outside the stop and variable speed pump stop and gear pump spline and gearbox spline shaft spline, the gap between the two is reasonable, all on the gear pump oil have an impact. Search Keyword: gear oil pump supply information Tungsten alloy swaging rod is a type of tungsten alloy product that is used in various applications such as aerospace, defense, medical, and industrial. The swaging process involves reducing the diameter of the rod by applying pressure to the material, which results in an increased density and improved strength. Tungsten Alloy Swaging Rod,Tungsten Alloys Rods,Tungsten Heavy Alloy Rod,Tungsten Rods For Military Zhuzhou Jiuding Metal Technology Co., Ltd. , https://www.zztungstenheavyalloy.com
Tungsten alloy swaging rods are made from high-density tungsten alloys, which typically include tungsten, nickel, and iron. The addition of these elements improves the overall strength, ductility, and machinability of the material.
The swaging process used to create tungsten alloy swaging rods involves a series of steps. First, the Tungsten Alloy Rod is heated to a specific temperature, which makes it more malleable and easier to work with. Next, a die is used to apply pressure to the rod, which causes it to reduce in diameter. This process is repeated multiple times until the desired diameter is achieved.
Tungsten alloy swaging rods are used in a variety of applications due to their high strength, density, and resistance to corrosion. They are commonly used in the aerospace industry for components such as balance weights, control surfaces, and engine parts. In the medical industry, tungsten alloy swaging rods are used for radiation shielding and as components in medical devices. They are also used in industrial applications such as oil drilling and mining.