Connect oil express lead you to remove the fat from meal which the fat contains of final meal is about 8%. It help customers get high quality and good appearance of products.
When the cooked meal feed in to express, as the two screw pitch is gradually reduced along the discharge end, the bottom diameter is gradually increasing, so the raw material in second screw slot is gradually compressed, the pressure is up to 1.5Mpa. The oil and water outflow from stainless steel filter mesh with the continuous compression of raw material. Filter pore size is from φ4.5mm to φ1mm descending arranged, oil and water are collected by bucket, squeezed bread fall from the discharge port , and dry in the dryer which transport by screw conveyor.
Fat Press Machine, Oil Press, Protein Rendering Equipment, Feature Rendering Machine Connect Group For Poultry Project , https://www.connectpoultry.com
1. Capacity: 1~500m3/h
2. Head 10-125m
3. Temperature: -20~350C
Brief introduction
With scientific construction and excellent performance, it is used in transporting high temperature liquid without solid particles. And the corrosion-resistant degree and working temperature is depended on the material of the parts.
Application scope
1. Petro-chemical industry
2. Oill industry, hot oil circulation system
3. Synthetic-fibre
4. Textile dyeing and printing industry
5. Plastic and rubber industry
6. Papermaking industry
7. Timper process industry
8. Construction and building industry
Besides the above fields, the pumps are also proper in machinery manufacturing, food processing, medicine making and the circling system for oil supplying of the hot oil boiler, the circling system of the heating installation.
Performance scope of RY hot oil pump at 50Hz
1. Capacity: 1~500m3/h
2. Head 10-125m
3. Temperature: -20° C~350° C
Struction
It is single stage cantilevel structure, horizontal suction and vertical discharge design. And the whole machine group doesn't require cooling system...
The main parts include: Pump casing. Impeller, bearings, shaft seal. Adopt gland packing seal and anti high temperature oil seal combined type
Feature
1. High tempeture proof
2. Air cooling
3. Simple structure
4. Cost save
5. Excellent performance and safety.
Excellent performance,
1. Capacity: 1~500m3/h
2. Head 10-125m
3. Temperature: -20~350C
Brief introduction
With scientific construction and excellent performance, it is used in transporting high temperature liquid without solid particles. And the corrosion-resistant degree and working temperature is depended on the material of the parts.
Application scope
1. Petro-chemical industry
2. Oill industry, hot oil circulation system
3. Synthetic-fibre
4. Textile dyeing and printing industry
5. Plastic and rubber industry
6. Papermaking industry
7. Timper process industry
8. Construction and building industry
Besides the above fields, the pumps are also proper in machinery manufacturing, food processing, medicine making and the circling system for oil supplying of the hot oil boiler, the circling system of the heating installation.
Performance scope of RY hot oil pump at 50Hz
1. Capacity: 1~500m3/h
2. Head 10-125m
3. Temperature: -20° C~350° C
Struction
It is single stage cantilevel structure, horizontal suction and vertical discharge design. And the whole machine group doesn't require cooling system...
The main parts include: Pump casing. Impeller, bearings, shaft seal. Adopt gland packing seal and anti high temperature oil seal combined type
Feature
1. High tempeture proof
2. Air cooling
3. Simple structure
4. Cost save
5. Excellent performance and safety.
Working Principle
Hot Oil Circulation Pump with Ex Motor
Model NO.: RY
Head: 10-125m
Temperature: -20~350c
Trademark: SUHUA
Origin: China
Model NO.: RY
Head: 10-125m
Temperature: -20~350c
Trademark: SUHUA
Origin: China
Excellent performance,