Zinc Shot is a very common Metal Abrasive used on Aluminium die casting parts and Zinc die casting parts. Zinc shot has a similar density but lower hardness. It could clean the surface of some soft casting parts without any damage while steel shot can not. Compared with aluminium, it is heavier and safer when shot blasting. Benefit from these advantages, Zinc shot is widely used in metal casting industry for surface treatment.
Longlived Zinc Shot is made from high qiality zinc wire by drawing, cutting and rounding. There are five shapes of Longlived Zinc Shot and they are as cut, G1, G2, G3 and even G4. The size is from 0.25mm-3.0mm. Of course, customize is available according to your requirement.
Longlived metal abrasive make your shot blasting cheaper, faster and cleaner.
Zinc Cut Wire Shot,Zinc Cut Wire Shot Peening,Zinc Cut Wire Shot Blasting Media,Zinc Cut Wire Shot Peening Media Longlived Metal Products Co ., Ltd , https://www.stainlesssteelshotcn.com
 Transfer molding press
Transfer type molding press for rubber is our company's original R&D results and has a number of national patents.
It is advanced rubber pressure molding equipment.
Feature of product
Clamping cylinder clamps mould first, then injection
Cylinder press rubber material into mould cavity uniformly.
Few fin, precision geometric size, physical mechanical
Performances are uniform and stable.
The main moving platen raises rapidly, clamps slowly, declines rapidly, production efficiency is improved and the mould isprotected
It uses automatic in-out mould and ejection mechanism, reduces labor intensity and avoids the artificial damage to mould
Users can choose PLC control and touch-control screen imported from Siemens or Mitsubishi
It has two working mode of point moving and semi automation.
Â
Item             Â
XLB-D800×800
Clamping force (KN)
4000
Clamping stroke (mm)
400
Rapid clamping speed (mm/s)
≥50
Heating platen size (mm×mm)
800x800
Heating Plate Spacing (mm)
500
Max temperature (°C)
250
Material Cylinder Spec(Dia-mm×Hei-mm)
Φ130×445
Injection Stroke (mm)
680
Injection Pressure (MPa)
80
Ejector Stroke (mm)
400
Max Ejector Force (kN)
120
Motor Power (kW)
7.5+4
Heating Power (kW)
34KW
External Dimension(L×W×H)mm
2500mm×3500mm×
(4800~5200)mm
Oil Tank Capacity (L)
500
 Transfer molding press
Transfer type molding press for rubber is our company's original R&D results and has a number of national patents.
It is advanced rubber pressure molding equipment.
Feature of product
Clamping cylinder clamps mould first, then injection
Cylinder press rubber material into mould cavity uniformly.
Few fin, precision geometric size, physical mechanical
Performances are uniform and stable.
The main moving platen raises rapidly, clamps slowly, declines rapidly, production efficiency is improved and the mould isprotected
It uses automatic in-out mould and ejection mechanism, reduces labor intensity and avoids the artificial damage to mould
Users can choose PLC control and touch-control screen imported from Siemens or Mitsubishi
It has two working mode of point moving and semi automation.
Â
Item             Â
XLB-D800×800
Clamping force (KN)
4000
Clamping stroke (mm)
400
Rapid clamping speed (mm/s)
≥50
Heating platen size (mm×mm)
800x800
Heating Plate Spacing (mm)
500
Max temperature (°C)
250
Material Cylinder Spec(Dia-mm×Hei-mm)
Φ130×445
Injection Stroke (mm)
680
Injection Pressure (MPa)
80
Ejector Stroke (mm)
400
Max Ejector Force (kN)
120
Motor Power (kW)
7.5+4
Heating Power (kW)
34KW
External Dimension(L×W×H)mm
2500mm×3500mm×
(4800~5200)mm
Oil Tank Capacity (L)
500
Rubber Transfer Molding Press/ Rubber Molding Machine
Model NO.: SK
HS Code: 84778000
Model NO.: SK
HS Code: 84778000