September 17, 2025

2 Inch Diesel High Pressure Piston Water Pump Philippines

Posted on

Model NO.: kw
Power: Diesel Engine
Start Up: Electric Pump
Application: Clarified Water Pump
Theory: Centrifugal Pump
Agricultural Irrigation: Flood Drainage
Mining Machinery: Oil Land Machinery
Municipal Project: Fire Fighting
Waste Water Discharge: Industrial Water Supply and Drainage
Sea Water Breeding: Stable Pressure Water Supply System
Remote Intelligent Water Supply: off Duty Control
Trademark: Sunny
Transport Package: Plywood Case
Origin: China
HS Code: 8413709990
Product Description 1. The dewatering pump system consists of a self-priming centrifugal pump with semi-open impeller and a Simplex separator where air can separate from the liquid and be sucked by a vacuum pump. 2. The vacuum pump allows the unit to be primed automatically and capable of drawing significant quantities of air, allowing the priming of a wellpoint system and maintaining it under vacuum, or draining an excavation thoroughly under "snore" conditions. Applications:
Construction Industrial Municipal Agricultural
Mining Dewatering Industrial Waste Sewage
Oil Field Petrochemical Paper Mills Processing
Diesel Engine Water Pump Unit PUMP INTRODUCTION Automatic diesel pumps can be selected based on usage places head, capacity, and liquid request. According to requirements of matching different working conditions, single-stage suction centrifugal pump, high pressure pump, double suction split casing pump, and so on can be chosen. Products with advanced technology and a high degree of automatic, superior performance and protection function is complete, reasonable structure, easy to install, cost-effective. High when a sudden blackout of the factory, emergency water supply pump set of diesel engine starts automatically add pipe network pressure. PUMP APPLICATION Diesel pump sets are commonly used for high-rise buildings, water companies, steel mills, wineries, hotels, hospitals, chemical plants, and other projects on emergency water supply. PUMP USE RANGE CAPACITY: 10-27000m³/h HEAD: 10-15000m PRESSURE: 0.1MPa-150MPa POWER: 3-2250kw FOR EXAMPLE (SN-OTS): Features of SN-OTS type double-suction horizontal split centrifugal pump: Split case design permits easy disassembly, that is, inspection is simplified. It will not affect the pump casing or disturb the centering alignment of inlet & outlet pipeline when parts replacement is necessary. The double-suction design has a good suction performance which ensures high suction lift even under the large flow operation condition. Pump shaft seal can be used for non-cooled packaging seal or non-cooled single face non-equilibrium mechanical seal. Single-stage double-suction centrifugal pump is a new style energy saving horizontal split pump, for conveying water or other liquid which physical and chemical properties similar to water. According to user requirements, it can be used to transport sediment water or all kinds of corrosive liquid by changing the pump structure and material. This series of pumps are widely used in areas such as factories, mines, city water supply and drainage, power stations, farmland irrigation and drainage, and various water conservancy projects etc.
Diesel Pump
Model		 Flow Head Revolving
Speed		 Inlet
Diameter		 Discharge
Diameter		 Diesel Engine
m³/h L/s m r/min mm mm Power Model
SN-ST150-78 162 45 78 2900 150 100 60 4BTA3.9-C80
SN-150-50 170 47 47 2900 150 100 60 4BTA3.9-C80
SN-200-95 234 65 93 2900 200 125 123 6BTA5.9-C165
SN-200-63 288 80 62 2900 200 125 82 4BTA3.9-C110
SN-200-42 288 80 41 2900 200 125 60 4BTA3.9-C80
SN-250-65 486 135 65 1450 250 150 163 6CTA8.3-G2
SN-250-39 486 135 38 1450 250 200 86 6BT5.9-G2
SN-250-24 486 135 23 1450 250 200 50 4BTA3.9-G2
SN-250-14 486 135 14 1450 250 200 36 4BT3.9-G2
SN-300-90 792 220 90 1450 300 200 370 NTAA855-G7A
SN-300-58 792 220 548 1450 300 200 231 NT855-GA
SN-300-32 792 220 32 1450 300 250 106 6BTA5.9-G2
SN-300-19 792 220 19 1450 300 250 86 6BT5.9-G2
SN-350-75 1260 350 75 1450 350 250 470 KTAA19-G5
SN-350-44 1260 350 43 1450 350 300 264 NTA855-G1A
SN-350-26 1260 350 26 1450 350 300 163 6CTA8.3-G2
SN-350-16 1260 350 16 1450 350 300 86 6BT5.9-G2
FOR EXAMPLE (SN-ZX/ZW): Specification of our self priming pump
Model Size
(inch)		 R.P.M.
(r/min)		 Max. Flow
(m³/h)		 Max. Head
(m)		 Suction Lift
(m)		 Power
(hp)		 Max. Solids
(mm)
SN-ZW2 2 1150-2900 46 36 7.6 1-10 44.45
SN-ZW3 3 650-2150 107 35 7.6 1-20 63.5
SN-ZW4 4 650-1950 163 36 7.6 1-30 76.2
SN-ZW6 6 650-1550 330 33 7.6 2-40 76.2
SN-ZW8 8 650-1350 600 34 7 7.5-75 76.2
SN-ZW10 10 650-1450 775 40 6.7 10-100 76.2
SN-ZW12 12 650-1250 1275 42 4.9 20-125 50
SN-ZWU3 3 850-2150 85 62 7.6 1.5-25 20.63
SN-ZWU4 4 850-2150 148 60 5.2 3-40 28.57
SN-ZWU6 6 850-1950 308 58 4.5 5-75 31.75
Diesel Engine Specification:
Drive Variation Cummins, Deutz, Ricardo, Perkins, Chinese Diesel or any others can be specified
Power Range 50HP~1066HP
Diesel Driving Water cooled, air cooled
Cylinder 1, 2, 4 or 6
Cylinder Diameter 95, 96, 100, 102, 105, 110, 113 etc
Displacement 3.26~9.49L
Fuel Consumption 218, 224, 231, 251.6, 258.4 etc
Connection Type Pin Coupling
Installation Way Diretly coupling engine mounted, horizontal V-belt
Skid Mounted on Trailer 2 wheels or 4 wheels Trailer/Trailor
Product details: 1. SN Non-clogging Dewatering Pump consists of a self-priming centrifugal pump with semi-open impeller and a simplex separator where air can separate from the liquid and be sucked by a vacuum pump, the max suction head can reach to 9.5m
Pump Model YP100 YP125 YP150 YP200 YP250 YP300
Standard Pump Body Material Cast Iron
Standard Pump Impeller Material Stainless Steel
Standard Pump Shaft Material 2Cr13
Bearing Type Ball
Maximum Lift in theory (m) 9.5
Nominal Speed (rpm) 1800
Inlet & Outlet Size (mm) 100 125 150 200 250 300
Max. Dia Solids Handling Capability (mm) 20 26 76 76 50 65
Max. Discharge Head (m) 32 34 42 53 60 55
Max. Flow Rate (m³/h) 150 200 360 540 1000 1800
2. IS Single Stage End Suction Water Pump is for clean water or liquid similar to clean water, with high temperature mechanical seal it can be used to transfer hot water (150 degree celcius). It is used for industrial and city clean water supply and drainage, irrigation, fire protection, water supply, metallurgy, chemical, paper making, etc.
Working Principle Standard centrifugal, end suction
Casing Material HT200, SS304, SS316
Impeller Material HT200, SS304, SS316, Copper
Pump Sealing Packing seal, Mechanical seal
Capacity Range 6.3-400m³/h (27.7-1760US.GPM)
Head Range 125m (410ft)
Maximum Diameter 200mm (8inch)
3. S/XS High Flow Split Case Water Pump with high capacity and pressure, which can transfer clean water or similar liquids (Oil).
Working Principle Centrifugal, Split Case Pump
Casing Material HT200, SS304, SS316
Impeller Material SS304, SS316, Copper, HT200
Pump Sealing Packing seal, Mechanical seal
Capacity Range 126m³/h~8520m³/h
Head Range 8m~140m
Inlet/Outlet Diameter Range 6"(150mm)~32"(800mm)
4. D High Pressure Multistage Water Pump is used system of high-pressure run hot and cold water circulation and booster pumps in parallel water supply of the high rise building, fire, boiler feed water and cooling water systems and a variety of irrigation fluid conveying.
Working Principle Centrifugal, Multi-stage
Casing Material HT200, SS304, SS316
Impeller Material HT200, SS304, SS316, Copper
Sealing Type Packing seal, Mechancial seal
Flow Range 3.75-540m³/h (16.5-2376US.GPM)
Maximum Head 1056m (3463.7ft)
Maximum Caliber 250mm (10inch)
5. ZX/ZW/SP Self Priming Water Pump is our latest generation product base on US technology and craftwork. It is designed for economical & trouble-free operation in handling solid-laden liquids and slurries.
Rigid PETG PET Composite Plastic Film

PsPvc AHtb1y2aluwmtbunjy1xbq6ymrvxaq

Common structure

Double-layer composite such as PT/PE, paper/aluminum foil, paper/PE, PET/PE, PVC/PE, NY/PVDC, PE/PVDC, PP/PVDC, etc.

Three-layer composite such as BOPP/PE/OPP, PET/PVDC/PE, PET/PT/PE, PT/AL/PE, wax/paper/PE, etc.

Four-layer composite such as PT/PE/BOPP/PE, PVDC/PT/PVDC/PE, paper/aluminum foil/paper/PE, etc.

Five-layer composite such as PVDC/PT/PE/AL/PE, etc.

Six-layer composite such as PE/paper/PE/AL/PE/PE, etc.

Working Principle Centrifugal, Self-priming
Material Cast iron, ductile iron, stainless steel, cast steel
Max. Suction Head 7.6m
Model HF-Degradable composite film
Materials Degradable composite material
Thickness 30-150u
Manufacturing type Multiple Extrusion
Characteristics Moisture-proof/degradable
Diaphaneity translucent
Cradle China
Core 3inch or 6inch
Brand TL
Delivery port Zhuhai
Width Customize
Usage Packing film
Hardness Soft
Payment 30% advanced payment
Application Compostable disposable packaging bag, flat bag, fruit bag, drawstring bag.Compostable agricultural film Suitable for vacuum packaging, 100 degree boiled packaging, food packaging, frozen packaging food, jelly packaging, industrial products packaging, degradable label materials, etc

The composite film is generally composed of substrate, laminating adhesive, barrier material, heat sealing material, printing and protective layer coatings, etc. The commonly used composite film structure is: surface layer/adhesive layer1/intermediate barrier layer/cat composite layer2/layer heat seal layer. In the composite film process, the structure of a multilayer composite material is usually expressed in abbreviated form. For example, a typical medicinal composite film can be expressed as: surface layer/printing layer/laminated layer/aluminum foil/adhesive layer (heat seal layer).

PE release film, PET release film, OPP release film,: PC release film, PS release film, PMMA release film, BOPP release film, PE release film, plastic film, TPX release film, PVC release film , PTFE release film, PET release film, single silicon release film, polyester release film, Teflon release film, composite release film, high temperature release film, polyphenylene ether release film, poly four Vinyl fluoride isolation film, polyethylene release film, composite release film (that is, the base material is a composite of two or more materials), etc.

PET, PE, OPP, BOPET, BOPP as base material, apply silicone oil or release agent on the surface

Composite Plastic Film
 types

PP/PE

LDPE/PAPPER

PP/PET

coextruded polypropylene paper

PVC/aluminium

22PE

coextruded polypropylene paper

synthetic paper

PE protective film can be produced according to customers' different colors and width within 1500 mm.
Our company`s chief stock is black and gray PE film with a specification of 1060*0.038 mm; black and white PE film with a specification of 1060*0.045 mm; milky white PE film with a specification of 1065*0.065 mm;
When the composite temperature of the production coil is ≤180℃, the stability of the silicon surface of the PE film will not change;
When the temperature is ≤70℃ during use, the effect of releasing the film remains unchanged and it is easy to uncover.

Pvcpv 2Pp 3


Petg Pet Silicone Oil Film,Pe Original Membrane,Hdpe Film Sheet,Polypropylene Film

Shandong Top Leader Plastic Packing CO., LTD , https://www.sdzlplastic.com