April 26, 2024

Hot Sale 62 Seats Electric Sightseeing Train with Green Power

Posted on

Model NO.: 62 seats sightseeing train
Battery: 80V 190ah Lionbattery
Motor: 12kw DC 80V
Max. Speed (Km/H): 25
Max. Range(Km): 80
Max. Climbing Capacity: 8%
Carriage Dimension(mm): 4430*1800*2300
Unloading Weight(Kgs): 2800kgs
Qty in Container: 2*40hq
Voltage: 80
Seat No.: 20*2
Trademark: OEM
Transport Package: PE Foam, Strap etc.
Specification: 4100*1860*2420
Origin: Changzhou
HS Code: 8711901010
62 seats electrical train
This train is powered by car batterys and do not discharge harmful gas into the atmosphere.it needs only battery charging.this vehicle has excellent performance ,new appearance design,exquisite trim and comfortable seat.this Electric vintage cars is build especially for tourist attractions,parks,giant entertainment venue,village,campus,garden hotel,holiday villages,Villa Districts,pedestrian mall,airpor,harbour,wharf and etc.
YMJ-6620 electrical trainconfiguration table
  Item electric train picture
Whole vehicle main dimensions Overall dimensions (LxWxH)mm· 4850×1860×2420  
Persons in cab   (persons) 4434×1800×2300
Max. speed(km/h) 30*2+2
Min. turning  radius(m) 10
Max. slope of climb(%) ≤6.5
Max. braking distance(m) 5%
Max Range(km) ≤4
Min.ground clearance (mm) 80
Curb Weight (kg) ≥150 Wheel base (mm) 3000
Persons in cab   (persons) 2800 Wheel track  (front/rear)  (mm) 1400
Electrical  system Battery 96V 220ah
Charger 96V30A
Controller Italian SME controller
Traction motor 13.5KW Ac series motor
DC-DC 96V to 12V /35A  2 group
panel Current,  voltage
Powertrain & Handling Power transmission system rear engine rear drive
,With the transmission
steering system single-linkage gear type Steering wheel ,power-steering
The front axle and suspension non-independentsuspended,Hydraulic damping)
The rear axle and suspension non-independentsuspended,leaf spring
braking system drum brake ,Double circuit hydraulically controlled,park braking system
tyre Iron wheel rims, tires 6.00-14
appearance
 		 paint Whole vehicle uses the car paint computer paint, professional spraying equipment
frame Trailer, closed carriage ,above is Aluminum alloy push-pull window,Below is the door,rear 1300X600X600 baskets
Frame + body High quality carbon tube welding antirust frame+glass fiber reinforced plastics
Lighting and signal comination headlamp, turn light, LED tail lamp, electric horn and reversing buzzer
front windshield safety glass
interior Chair  emulational leather+PU
switch start button,Light and wiper switch change-over switch
MP3 US19  MP3,loudspeaker
     
Note: 1. The vehicle distribution charger and a set of tools
2.Vehicle configuration, color can be customized according to customer requirements
 
 





For more detailed info, welcome to enquiry us.

 

I. High & Low voltage cabinets installation of power plant

1. 10KV high voltage switch cabinet installation of power plant

2. 0.4KV low voltage switch cabinet installation of power plant

3. Installation of generator protection system, synchronization system, transformer protection, H.V. motor protection, circuit protection in a power plant.

II. Electrical configuration testing items of power plant

1. Vacuum circuit breaker insulation resistance measurement, each phase circuit resistance measurement and AC voltage withstand tests of 10KV H.V. switch cabinet.

2. DC resistance measurement of CT and PT, polarity test, ratio test, AC voltage withstand tests in 10KV H.V. switch cabinet.

3. AC voltage withstand tests for whole 10KV H.V. switch cabinet.

4. AC resonant test for 10KV H.V. electric cable.

5. DC resistance measurement of generator stator and rotor.

6. Generator stator coil insulation resistance measurement and DC voltage withstand tests.

7. Generator rotor insulation resistance measurement.

8. Generator rotor AC impedance and power loss tests.

9. No-load characteristic test of generator

10. Generator checking phase sequence (fist checking phase and second checking phase separately).

11. Generator short circuit characteristic test.

12. Measurement of residual voltage of stator after automatic magnetic blow-out and switch opening of generator.

13. Generator shaft voltage measurement.

14. Generator simulate synchronization.

15. All of the second circuit checking, measuring, switch tripping & closing tests, protection fixed value setting, protecting the STG trip test and magnetic blow-out tripping test for Steam Turbine and generator.

III.Electrical problem troubleshooting in power plant

Problem Description: a coal mine`s 35KV H.T. switchgear OC protection tripped suddenly in He`nan Province, it caused sudden power lost of mine fan and endanger miner safety.

Auto-reclosing via switchgears` automatic reclosing function, through analysis, the reason is a set of 3000KW generator failure. Specific reason is: When the turbo-generator was running normally, exciting voltage lost suddenly, leading phase operation happened, the generator absorbed reactive power and lead to becoming motor running. Generator protection and power plant connecting line protection did not launch. After the generator absorbed a certain value of reactive power, the 35KV H.T. switchgear`s OC protection tripped.


Investigation: generator and power plant connecting line protection setting fixed value exceed the protection fixed value of 35KV switchgear side, it lead to nearby protection did not launch and override trip when generator failure.

Electrical Cabinet Care

Electrical Cabinet Care,10Kv Electrical Cabinet Care,0.4Kv Electrical Cabinet Care,Electric Governing Reconstructing

Shandong Qingneng Power Co., Ltd. , https://www.steamturbine.be