October 22, 2021

Roller Shutter Panel Slat Door Making Roll Forming Machine Line

Roll Station: 22 Stands
Frame: 20mm
Shaft Diameter: 38mm
Feeding Thickness: 0.3mm to 0.8mm
Cutter Standard: Gcr12
Roller Standard: 45# Steel with Cr
Trademark: Tianyu
Transport Package: 40FT Container
Specification: 10000*800*1100
Origin: China
HS Code: 8462219000
Roller shutter panel slat door making roll forming machine line

Product Description
Control System PLC Colored Touch Screen
Main shaft material 45# steel
Hydraulic pump motor 5.5kw
Main Motor Power 7.5kw
Power Supply 380V, 3-Phase,50Hz or any
Forming Speed 8-12m/min
Roll Station 22 stands
Frame 300mm H steel
Middle panel thickness 20mm
Shaft Diameter 38 mm
Feeding Thickness 0.3mm to 0.8mm
Cutter Standard GCr12
Roller Standard 45# steel with Cr
Wheel Quenching treatment. Hardness: 62.
Dimension 10000mm*800mm*1000mm

Components of line

(1) Manual Decoiler   (Max.Capacity:2T   Coil Inner-Diameter: 508mm)

(2)Roll-Forming M/C (Just for your reference, will make the machine as your drawing)
Roller Shutter Panel Slat Door Making Roll Forming Machine Line

(3) Cutting Mechanism
It adopts hydraulic motor drive and automatic location to decide the dimension and cut the target products.
Roller Shutter Panel Slat Door Making Roll Forming Machine Line

(4) Hydraulic System
Match equipment: a set of hydraulic tank , a set of hydraulic oil pump, two hydraulic pipes and two sets of electromagnetism valves.
Hydraulic pump power: 4KW

(5)Computer control cabinet :
1). Screen: DELTA screen from Taiwan
3). Automatic length measurement
4). Automatic quantity measurement
5).Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

One counter gauges length, pulses, and decides length

(7)Output table (3M one set)

21 years wealth experience.
Exported to more than 30 countries.
We can design according to clients' need.
Roller Shutter Panel Slat Door Making Roll Forming Machine Line

Other type machines may you like:
Roller Shutter Panel Slat Door Making Roll Forming Machine Line

Our service

1.We have professional team to make different kinds of roll forming machines for our customers, from designing, processing,assembling, debugging, delivery.

2.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country.

3.You can send your men to our factory. we will teach them how to operate the machine without training charges.

4.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine.

5.Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support.

If there is any problems happened to the machine, we will provide solution at once.

Hope we could establish win-win business relations in the soon future!


Q:How is this machine's service life?

A:In the normal maintenance,the service life at least 8 years.

Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.

Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.

Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.

Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.
Roller Shutter Panel Slat Door Making Roll Forming Machine Line


Gasoline Forklift uses gasoline as fuel. On the basis of Gasoline Forklift , a set of liquefied petroleum gas supply device which includes gas tank, converter and bracket is added to make it to a Dual Fuel Forklift. This type forklift is called gasoline & LPG forklift. LPG is short for liquefied petroleum gas. The LPG forklift has gradually become a trend.

Gasoline & LPG forklift has the advantages which includes long service life, low maintenance cost, good environmental performance, low noise and low fuel cost. The main models of Gasoline & LPG forklift are 2 tons, 2.5 tons, 3 tons and 3.5 tons.

Gasoline & LPG forklift are widely used in ports, railway stations, airports, depot, workshop, warehouse, and distribution center, etc., and can enter the cabin, wagon, and the container to load and unload the goods with pallets. It is the necessary equipment for pallet transportation and container transportation.

SHANTUI brand gasoline forklift has the following characteristics:

1.    The converter use IMPCO brand, world famous. Lpg tank use high quality.

2.     The electric system uses intelligent electronic instruments, which can automatically measure water temperature, fuel level, and engine oil pressure; the connectors have a special water-proof seal structure, ensuring safe and reliable operation;

3.    The ergonomically designed, comfortable cab with FOP function provides operators with a safe work environment.

4.    The steering system uses a steering gear with hydraulic boost, which makes it flexible and easier to steer;

5.    Shock absorption system: the cab/cab canopy is equipped with a shock absorption system. The control device, canopy, and operator seat are installed on the cab/cab canopy, which greatly reduces overall machine vibrations and provides the operator with a comfortable work environment.

Shandong Volin Heavy Machinery Co.,ltd. is a professional manufacturer and supplier of Shantui forklift trucks in China. Our main products include Diesel Forklift , Electric Forklift and Gasoline Lpg Forklift, Construction Machinery like bulldozer, Wheel Loader , excavator, motor grader and road roller and Construction Machinery Parts.

Shantui have distributors all over the world, we can supply fast service, there are enough parts stock in our branch, it can meet the spare parts requirements.

Shantui products including diesel forklift, electric forklift, heavy duty forklift, gasoline forklift, container forklift, Side Loader , Pallet Truck , construction machinery including shantui bulldozer, wheel loader, crawler excavator, road roller, generator set, motor grader, truck crane, construction machinery parts, Shantui Parts , Cummins engine parts, komatsu parts, and other machinery parts.

gasoline forklift

Gasoline Forklift

Gasoline Forklift,Gasoline Forklift Truck,Gasoline Fork Lifter,Lpg Forklift Truck

SHANDONG HE FORK TRUCK CO.,LTD. , https://www.shantuimachinery.com