Train Friction Brake Block

Specifications

 

4. The HGM - A high friction composition brake shoe steel back and friction body two parts.

Brake shoe shape size (mm) :

(1) the steel back of outer arc: R450

(2) brake shoe width: 820-1

(3) the thickness of the brake shoe: 45

 

5. The steel back is made of Q235A steel manufacturing, steel plate performance shall comply with the provisions of GB/T700.

 

6. Brake shoe is made up of steel back and friction.Friction main raw material for: phenolic resin, nitrile rubber, steel fiber,

reduced iron powder, graphite, etc.

 

7. The friction performance component of the learning performance and friction wear performance of two parts.

 

The mechanical properties shall comply with:

Table 1 physical and mechanical performance of the brake shoe

 

Unit performance indicators

G/cm3 density less than nominal worth plus or minus 5%

The compression strength of 25 Mpa or greater

The impact strength acuity 2.0 kJ/m2

The compression modulus of Mpa to 1.3 * 103 or less

Rockwell hardness (HRR) 90 or less

Water absorption percentage < 1.5%

Oil absorption percentage < 1.5%

 

Brake friction wear performance should be consistent with:

Table 2.The change of the instantaneous friction coefficient range (20 kn brake shoe pressure)

Speed (km/h) 0 10 20 30 to 40 50 to 60

The maximum 0.63 0.602 0.558 0.546 0.515 0.482 0.471

Standard 0.48 0.46 0.43 0.42 0.39 0.37 0.36

The minimum 0.42 0.40 0.40 0.36 0.33 0.32 0.37

Press Dropper

Button Aluminum Dropper is a small tool used for dispensing liquids in controlled amounts. It consists of a glass tube with a rubber bulb attached to one end and a button on the other end. The button is made of aluminum, which provides durability and ease of use.Neck size:18/415,22/415,Material: aluminum, silicone, glass, plastic.Support customization

To use a button aluminum dropper, you simply squeeze the rubber bulb to draw liquid into the glass tube. Then, by releasing the bulb and pressing the button, you can dispense the liquid drop by drop. This allows for precise and accurate dispensing, making it ideal for applications such as laboratory experiments, essential oil blending, or medication administration.

The aluminum button on the dropper provides a comfortable grip and allows for easy control of the liquid flow. It is lightweight and resistant to corrosion, ensuring long-lasting performance. The glass tube is transparent, allowing you to see the liquid inside, and it is also easy to clean and sterilize.

Overall, a button aluminum dropper is a practical and versatile tool for dispensing liquids in various settings. Its combination of aluminum and glass materials makes it durable, easy to use, and suitable for precise measurements.

Press Dropper,Button Aluminum Dropper,Aluminium Screw Cap,Oil Droppers

Jiangyin keyi packing Material Co.,Ltd , https://www.keyipacking.com