The thermal insulation Y-type Filter is an indispensable thermal insulation device for water, oil and gas pipelines and various equipment. Clear impurities in the medium to protect the normal use of valves and equipment.
Features of thermal insulation Y-type filter Y-type thermal insulation filter is used as an indispensable thermal insulation device for water, oil, gas pipelines and various equipment, and is usually installed at the inlet of pressure reducing valve, pressure relief valve, fixed water level valve or other equipment. It is used to clear the impurities in the medium to protect the normal use of valves and equipment. The filter has the characteristics of simple structure, small resistance and convenient sewage discharge. Generally, the water filter is 18~30 mesh/inch, and the ventilation filter is 40~100 mesh/inch. If the user has special requirements, the filter can be customized.
Y-Type Insulation Filter,Y Strainer,Y Strainer Stainless,Insulation Filter Jiangsu Qiantu Trading Co., Ltd. , https://www.qtprimingpump.com
2. Frequently check? Counseling? In the case of packing seals, the packing should be compacted regularly. If the packing can not guarantee the required sealing performance due to wear, new packing should be replaced. British Prime packing vacuum pump can not be pressed too tight. Normally packed packing, allowing water to drip out, to ensure cooling and to enhance tightness.
4. If the parking time is more than one day, the water in the pump and water separator must be released to prevent corrosion.
5. If the mechanical seal, the phenomenon of leakage, mechanical seals should check the dynamic and static ring is damaged, or the seal has been aging, in case of the above, are required to replace the new parts.
Circulating water vacuum pump maintenance
Circulating water vacuum pump maintenance 1. Normal working bearing than the ambient temperature is high 15 ℃ -20 ℃, maximum not allowed to exceed 55 ℃ -60 ℃ :, the normal working bearing should be loaded 3-4 times a year. Clean the bearings at least once a year and replace the lubricant holders.