May 15, 2024

Specific magnetic susceptibility of nickel minerals and cobalt minerals

The specific magnetic susceptibility of nickel minerals and cobalt minerals is shown in Table 1 and Table 2.
Table 1 Specific magnetic susceptibility of nickel minerals (room temperature: 20 ~ 30 ° C, particle size - 270 mesh)
mineral
Chemical formula
Specific magnetic ratio x
Cgs, ×10 -6
MKS, 10 -6
Nickel
Annabergite
(density 3.07g/cm 3 )
Arsenic nickel ore
Gersdorffite
(density 5.9 g/cm 3 )
Red arsenic nickel ore
Red enamel nickel ore
Breithauptite
(density 7.5 ~ 8.5 g / cm 3 )
Square cobalt ore
Skutterudite
(density 6.5 to 6.84 g/cm 3 )
Oblique arsenic ore
Rammelsbergite
(density 7.1 g/cm 3 )
Needle nickel ore
Millerite
(density 5.3 to 5.6 g/cm 3 )
Nicolite
(density 7.7 ~ 7.8 g / cm 3 )
Nickel ore
Polydymite
(density 4.5 to 4.8 g/cm 3 )
Strontium nickel ore
Ullmannite
(density 6.7 g/cm 3 )
Dark nickel serpentine
Garnierite
(density 2.27 ~ 2.89 g / cm 3 )
Ni 3 As 2 O 6 ·8H 2 O
Ni 3 As 2.74 O 8 ·8H 2 O
Ni 3 As 2.15 O 8 ·8H 2 O
(Ni 0.95 Fe 0.03 Co 0.02 )As 1.04 S 0.90
(Ni 0.94 Fe 0.04 Co 0.02 )As 1.07 S
(Ni 0.94 Co 0.09 )As 1.00 S 0.14
Ni 3 As 2.12 O 8 ·8H 2 O
NiSb+NiAs
(Ni 0.64 Co 0.36 )As 2.35
(Ni 0.89 Co 0.11 )As 2.00
(Ni 0.94 Co 0.06 )As 1.92
(Ni 0.96 Co 0.04 ) As 2.07
(Ni 0.91 Co 0.09 ) As 2.07
(Ni 0.51 Co 0.41 Fe 0.08 )
(As 0.89 S 2.11 ) 2.00
(Ni 0.95 Fe 0.05 )S
(Ni 0.98 Fe 0.05 )S
(Ni 0.98 Fe 0.02 )S
(Ni 0.91 Fe 0.09 )S
(Ni 0.92 Fe 0.06 Co 0.02 )As 1.00 S 0.07
NiAs 1.07
(Ni 0.83 Fe 0.12 Co 0.01 )As 1.04
Ni 2.97 Fe 0.03 S 3.61
Ni 2.67 Fe 0.27 Co 0.06 S 4.01
(Ni 0.94 Co 0.04 Fe 0.02 )
As 0.48 Sb 0.7 S 1.05
(Ni 0.82 Mg 0.16 )SiO 3 ·H 2 O
(Ni 0.87 Mg 0.13 ) (SiO 3 ) 1.10 (H 2 O) 1.11
6.01
5.98
0.18
0.19
6.11
0.045
0.063
0.06
0.024
0.072
0.101
0.073
0.242
0.039
0.130
0.703
0.099
0.052
0.113
0.343
0.417
0.110
11.71
11.89
0.075
0.075
0.002
0.002
0.076
0.0006
0.0007
0.0007
0.0003
0.0009
0.0013
0.0009
0.0030
0.0005
0.0016
0.0088
0.001
0.0006
0.0014
0.0043
0.0052
0.0014
0.147
0.149

Note: The specific magnetic susceptibility value is calculated by dividing the magnetic susceptibility by the density, the median value of the density, and the average value of the magnetic susceptibility.

Table 2 Specific magnetic susceptibility of cobalt minerals (room temperature: 20 to 23 ° C, particle size: -270 mesh)
mineral
Chemical formula
Specific magnetic ratio x
Cgs, ×10 -6
MKS, 10 -6
Sulfur copper cobalt ore
Carrollite
(density 4.5 to 4.8 g/cm 3 )
Sulphur cobalt ore
Cattierite
(density 4.8 g/cm 3 )
Cobalt ore
Cobaltite
(density 6.3 g/cm 3 )
Water cobalt mine
(density 4.32 g/cm 3 )
Oblique arsenic ore
Safflorite
(density 7.2 g/cm 3 )
Sulfur nickel-cobalt ore
Siegenite
(density 4.5 to 4.8 g/cm 3 )
Square cobalt ore
Skutterudite
(density 6.5 to 6.8 g/cm 3 )
Co 1.92 Cu 1.590 Ni 0.02 Fe 0.17 S 4.00
Co 1.94 Cu 1.60 Ni 0.06 Fe 0.03 S 4.00
Co 2.02 Cu 1.14 Fe 0.06 S 4.00
Co 1.76 Cu 0.87 Fe 0.05 S 4.00
Co 1.83 Cu 0.97 Ni 0.02 Fe 0.04 S 4.00
Co 0.75 Ni 0.05 Fe 0.24 S 2.00
Co 0.91 Ni 0.09 Fe 0.15 S 2.00
Co 0.94 Fe 0.07 As 0.98 S 1.00
Co 0.80 Fe 0.05 Ni 0.03 As 0.98 S 1.00
Co 0.98 Fe 0.05 As 0.97 S 1.00
Co=53.8, Fe4.6, Cu=1.1
Co=42.5, Fe=1.1, Cu=1.8
Mg = 3.4, SiO 2 = 4.2
Co=53.8, Cu=5.6
(Co 0.31 Fe 0.69 )As 2 +35FeS 2
(Co 0.58 Fe 0.42 )As 2 +87FeS 2
(Co 0.57 Fe 0.43 )As 2 +72FeS 2
Co 0.72 Ni 0.86 Fe 1.00 Cu 0.19 S 4
Co 1.02 Ni 1.81 Fe 0.28 Cu 0.09 S 4
(Co 0.51 Ni 0.02 Fe 0.47 )As 2.11 S 0.06
(Co 0.82 Ni 0.05 Fe 0.13 )As 2.59 S 0.16
(Co 0.38 Ni 0.06 Fe 0.56 ) As 2.09
(Co 0.54 Ni 0.37 Fe 0.09 )As 2.06
(Co 0.54 Ni 0.14 Fe 0.32 )As 1.98
0.580
0.127
0.153
0.658
0.365
4.081
2.912
0.102
0.095
0.054
1.007
1.166
1.104
0.127
0.107
0.110
1.989
0.174
0.121
0.032
0.100
0.064
0.057
0.0073
0.0016
0.0019
0.0083
0.0046
0.0513
0.0036
0.0013
0.0012
0.0007
0.0126
0.0146
0.0139
0.0016
0.0013
0.0014
0.0250
0.0022
0.0015
0.0004
0.0013
0.0008
0.0007

Silicone Ice Molds

About ice cube tray molds:
In our daily life,ice is a common thing,especially in summer,people usually put the ice into juice or water to let them cooling,and also it can keep food fresh like fruits or meat.People generally use plastic ice mold to produce ice.But sometimes if the plastic ice mold used for a while,it will broken.So,is it anything can instead of plastic ice mold to produce ice?
Yes,we can use silicone ice mold instead of it.Silicone ice mold is durable in use,and has many shape to choose,you can do your own design to produce other beautiful ice.
Choose silicone ice molds,you can get lots of fun when you are drinking juice or water.

Ice molds introduction:

1.Product name:Ice Cube Trays,Silicone Ice Trays,Round Ice Cube Trays,Novelty Ice Cube Trays,Ice Block Moulds,Ice Ball Mold
2.Place of origin:Guangdong China
3.Color:any pantone color
4.Logo:Printing,debossed,embossed
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized/stock
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:Use in ice producing

10.Silicone ice molds photos for reference.

silicone ice mold

Silicone Ice Molds,Ice Cube Trays,Silicone Ice Trays,Round Ice Cube Trays,Novelty Ice Cube Trays

Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconepettags.com