Laser Cnc Parts,Cnc Laser Control Board,Cnc Laser Machine Head Spare Parts,Cnc Laser Cutting Machine Parts Suzhou Wint Electric Co., Ltd , https://www.wintocool.com
Overview: Magnetic separators are essential equipment in the mining and mineral processing industries. They can be classified into dry and wet types based on their operating environment. The magnetic separator is widely used due to its simple structure, ease of operation, and maintenance. These machines are commonly applied for removing iron powder and are also extensively used in resource recovery, timber, mining, ceramics, chemicals, and food industries. Specifically designed for wet magnetic separation, they are suitable for magnetite, pyrrhotite, roasted ore, ilmenite, and other materials with particle sizes below 3mm. Additionally, they are effective for iron removal from coal, non-metallic minerals, and building materials.
Structure: The magnetic separator consists of several key components including the drum, roller, brush roller, magnetic system, tub, and transmission parts. The cylinder is fabricated by rolling 2-3 mm stainless steel plates, while the end cover is made from aluminum casting connected via stainless steel screws. A motor regulates the speed through a reducer, driving both the cylinder and magnetic roll to rotate. The magnetic system is open, installed inside the cylinder, and features exposed magnets. Magnetic blocks are secured to the yoke plate using stainless steel bolts, with the yoke's shaft extending outside the cylinder. An adjustable arm is attached to the end shaft, allowing for angle adjustments of the magnetic system. The trough area is constructed with stainless steel, while the frame and other body parts are welded using ordinary steel.
Drum Magnetic Separator Price Introduction: Drum magnetic separators are typically an economical method of mineral recovery unless high-intensity models are required. Electric high-intensity separators that generate up to 20,000 gauss tend to be expensive. However, rare earth drum magnetic separators are relatively more affordable and can produce magnetic fields around 6,000 gauss. Therefore, when seeking a process to recover valuable minerals, magnetic separation should not be overlooked, especially if some of the materials involved are magnetic or paramagnetic.
Magnetic Separator Technical Data
Type
(wet separator)
drum
diameter
(mm)
drum
length
(mm)
Magnetic intensity(Gauss)
Rotating speed(r/min)
Capacity (T/H)
Motor Power(kw)
CTB-609
600
900
≥1500
35
8-15
>100
CTB-612
600
1200
≥1500
35
10-20
>100
CTB-618
600
1800
≥1500
35
15-30
>100
CTB-718
700
1800
≥1500
28.6
20-45
>100
CTB-918
900
1800
≥1500
25.6
25-55
>100
CTB-921
900
2100
≥1500
25.6
30-60
>100
CTB-924
900
2400
≥1500
25.6
35-70
100~150
CTB-1018
1050
1800
≥1500
22
40-75
150~200
CTB-1024
1050
2400
≥1500
22
52-100
200
CTB-1030
1050
3000
≥1500
22
65-125
200
CTB-1224
1200
2400
Laser CNC Parts
Drum/CTB/ Wet Permanent Magnetic Separator
Model NO.: CTB
Warranty: 5 Years
Color: Grey
Customized: Customized
Condition: New
Model: CTB-921
Cylinder Size: 900*2100
Magnetic: 15000
Trademark: hongshengdacheng
Transport Package: Plastic Film
Specification: CTB-921
Origin: Tangshan
HS Code: 84741000