Quick Drying Liquid Adhesive Primer is recommended for using with only Xunda pipe coating system .The liquid adhesive systems consist of butyl based elastomers blended with polymeric resins dissolved in an organic solvent system. It is easy to apply and fast drying.
Liquid adhesive primer is ideal for hand brush application to rough , or grit blasted pipe surfaces. It provides a uniformly smooth, instant tack surface for Xunda pipe coating system.
Liquid adhesive primer is not only environmentally clean, but also highly effective in protecting against corrosion .
Waterproof Liquid Coating,Heat Reflection Liquid Coating,Room Wall Liquid Coating,Architectural Liquid Coating,Color Liquid Coating JINING XUNDA PIPE COATING MATERIALS CO.,LTD , https://www.xundapipelinetape.com
Δ Material: PE/PP film, PP Woven/sack Bag, Printed BOPP film
Δ Capacity: 60-800KG/HR
Δ Final pellet size: Φ 3mm × 3mm
Work Steps
1. Feeding: As a standard design, plastic scraps like films, filaments, and raffias are conveyed into the compaction chamber via a belt conveyor. For handling roll scraps, an optional roll hauling device is available. The motor drives for the conveyor belt and hauling device work with an ABB inverter. The feeding speed of the conveyor belt or roll hauling system is fully automatic, adjusting based on how full the compactor's chamber is. A metal detector can be integrated with the conveyor belt and will interlock with the control system to alert and stop the system if metal is detected in the feeding section.
2. Crushing and Compacting: The rotating blades of the compactor cut up incoming scraps. Frictional heating caused by high-speed rotation heats the material just below its melting point, helping it shrink. An optimally designed guide structure compacts the material and directs it into the extruder screw. This process crushes, dries, and compacts the material, enabling fast and stable feeding directly into the extruder.
3. Plasticization and Degassing: A specialized single-screw extruder is used to gently melt the pre-compacted material. The plastic scraps are well melted and plasticized in a 32 to 34D processing section. With a double-zone vacuum degassing system, volatile substances such as low molecular compounds and moisture are efficiently removed, making it particularly suitable for heavy printed films and materials with some moisture content.
4. Melt Filtration: A regular single-plate/piston double-station screen changer or a non-stop double-plate/piston four-station can be installed on the head of the extruder to provide effective filtration performance. The filtration technology requirements depend heavily on the quality of the input material and the intended use of the granules.
5. Pelletizing: Die-face water ring pelletizing system is set as the standard granulation method in the MLsystem. The self-adjusting pelletizing head ensures the best granulate quality and long uptime due to consistent blade pressure. The RPM of the rotating blades is automatically adjusted based on the melt extrusion pressure. Advanced dewatering vibration sieve combined with horizontal-type centrifugal dewatering provides high-performance dried pellets.
Final pellets (PE film)
Main Technical Parameters
Model
ML85
ML100
ML130
ML160
ML180
Output
PP
120KG
250KG
400KG
600KG
800KG
HDPE
150KG
300KG
500KG
700KG
1000KG
LDPE
180KG
400KG
600KG
800KG
1200KG
Machine weight
4000KG
6000KG
8000KG
12000KG
15000KG
Total power
140KW
215KW
325KW
420KW
590KW
Compactor/agglomerator
Compactor diameter
φ800mm
φ1000mm
φ1200mm
φ1300mm
φ1500mm
Blade (rotary/stable)
6/5
6/12
9/12
9/13
12/15
Motor
37KW
55KW
90KW
110KW
160KW
Extruder
Type
The degassing zone is designed by properties of different material
Screw diameter
φ85mm
φ100mm
φ130mm
φ160mm
φ180mm
L/D
33/1
33/1
33/1
30/1
30/1
Screw rotary speed (RPM)
0-120
0-120
0-120
0-120
0-120
Barrel heating power
24KW
35KW
54KW
75KW
120KW
Barrel cooling method
BY AIR
BY AIR
BY AIR
BY AIR
BY AIR
Temperature control zone
0.3KWx4
0.3KWx5
0.5KWx5
0.5KWx5
0.5KWx6
Motor power
55KW
90KW
132KW
185KW
250KW
Screen changer
Type
Two position plate hydraulic screen changer (without stopping machine and will not influence the final output)
Heating
7KW
10KW
16KW
20KW
30KW
Temperature control zone
1
1
1
1
1
Oil pump
1.5KW
2.2KW
3KW
3KW
3KW
Die & Cutting System
Die mode
Round shape die plate
Heating power of die
5KW
6KW
10KW
10KW
10KW
Cutting method
Die face cutting system
Cutting motor power
1.5KW
1.5KW
2.2KW
2.2KW
2.2KW
Temperature control zone
1
1
1
1
1
Water pump
2.2KW
3KW
4KW
4KW
4KW
Power of centrifugal dryer
2.2KW
3KW
4KW
5.5KW
7.5KW
To better meet your needs and provide a suitable quotation, please let us know:
• What type of material do you want to recycle? PE film? PP woven bag? HDPE/PP bottles? Or other plastics?
• What capacity (kg/h) do you need?
• What is the desired final pellet size (mm)?
• Any special requirements for the PE plastic pelletizing machine?
Our Service:
Before Sale
• Detailed product introduction
• Recommend suitable solutions
• Offer testing
During Manufacturing
• Provide layout and engineering conditions
• Offer screw plan and related documents
• Inform project progress
• Ensure the product meets technical specifications
After Sale
• Provide installation, commissioning, and training
• Offer spare parts
• Provide necessary technical support and updates
Feel free to contact me for more information.
Contact Person: Ms. Laura
Mobile: +86 15962366319
Waste PP PE Film Recycling Plastic Granulating Machine
Model NO.: ML100
Customized: Customized
Certification: CE, UL
Condition: New
Motor Brand: Siemens, ABB, Weg or Chinese Best Brand
Screw & Barrel Material: 38CrMoAl, Bimetallic, Nitrogen Treatment
Heating Method: Electrical Heating, Electromagnetic Heating
Material of Heater: Cast Aluminium, Cast Copper, Mica, Ceramic Heater
Cooling Method: Air Cooling
Degassing: Vacuum Degassing, Natural Degassing
Cutting Method: Die Face Cutting, Pulls Strap Cutting Method
Voltage: 380V 50Hz or Customized
Control Method: Inverter/Frequency
Guarantee: 12 Months
Trademark: PURUI
Transport Package: Standard Export Packing
Specification: 7000mm x 2500mm x 3000mm
Origin: Zhangjiagang City
HS Code: 84772010
Introduction