April 20, 2024

Med-L-Yqx-I/II Anaerobic Incubator Lab Incubator

Posted on

Model NO.: MED-L-YQX-I/II
Range of Temperature-Control in Incubati: Rt+3~60degree
Temperature Fluctuation in Incubation CH: Plus or Minus 0.3 Degree
Temperature Balance in Incubation Chambe: Plus or Minus 1 Degree
Internal Dimension of Incubation Chamber: 30*19*29
Dimension of Operation Chamber(Cm): 80*65*65
Trademark: Med Equipment
Origin: Guangzhou China
Model NO.: MED-L-YQX-I/II
Range of Temperature-Control in Incubati: Rt+3~60degree
Temperature Fluctuation in Incubation CH: Plus or Minus 0.3 Degree
Temperature Balance in Incubation Chambe: Plus or Minus 1 Degree
Internal Dimension of Incubation Chamber: 30*19*29
Dimension of Operation Chamber(Cm): 80*65*65
Trademark: Med Equipment
Origin: Guangzhou China
Product Name: L-YQX-I/II Anaerobic incubator

 
ApplicationRange:
This type of product is in the bacterial culture under anaerobic conditions and operating. This device can nurture the growth of anaerobic organisms most difficult. Anaerobic organisms can avoid the risk of death that anaerobic organisms are exposed to oxygen.
Structural Characteristics:
The equipment is composed of the incubation chamber, operating chamber, sampling chamber, pneumatics system, bottle rack, melting wax sterilize and etc.
MainFeatures:
1. Microcomputer intelligent temperature controlling and overheating protection system.
2. UV disinfection light to avoid pollution.
3. Gas flow adjusted by pneumatics system.
4. Stainless steel operation room chamber. Thick, transparent and impact resistant glass window. Operations should be with gloves.
5. Special vaccination sticks sterilizer, cuvette rack and oxygen removing catalyst converter inside.
YQX-IIFeatures:
1.Big LCD screen controller.
2.Touch switch for gas path control.
Technical Parameter Table:
 
 
Model YQX-I/II/ T
Time for creating anaerobic state in sample chamber <5min
Time for creating anaerobic state in operation chamber <1hour
Time for maintaining anaerobic circumstances in the case of the operating room to stop additional trace gas mixture,>12 hours
Range of temperature-control in incubation chamber RT+3ºC~60ºC
Temperature fluctuation in incubation chamber ±0.3ºC
Temperature balance in incubation chamber ±1ºC
Power Rate 220V,50HZ/600W
Net/Gross weight(kg) 240/320
Internal Dimension of Incubation Chamber(cm) 30×19×29
Dimension of Operation Chamber(cm) 80×65×65
Overall Dimension(cm) 126×73×138
Package Size(cm) 139×92×156
 
Product Name: L-YQX-I/II Anaerobic incubator

 
ApplicationRange:
This type of product is in the bacterial culture under anaerobic conditions and operating. This device can nurture the growth of anaerobic organisms most difficult. Anaerobic organisms can avoid the risk of death that anaerobic organisms are exposed to oxygen.
Structural Characteristics:
The equipment is composed of the incubation chamber, operating chamber, sampling chamber, pneumatics system, bottle rack, melting wax sterilize and etc.
MainFeatures:
1. Microcomputer intelligent temperature controlling and overheating protection system.
2. UV disinfection light to avoid pollution.
3. Gas flow adjusted by pneumatics system.
4. Stainless steel operation room chamber. Thick, transparent and impact resistant glass window. Operations should be with gloves.
5. Special vaccination sticks sterilizer, cuvette rack and oxygen removing catalyst converter inside.
YQX-IIFeatures:
1.Big LCD screen controller.
2.Touch switch for gas path control.
Technical Parameter Table:
 
 
Model YQX-I/II/ T
Time for creating anaerobic state in sample chamber <5min
Time for creating anaerobic state in operation chamber <1hour
Time for maintaining anaerobic circumstances in the case of the operating room to stop additional trace gas mixture,>12 hours
Range of temperature-control in incubation chamber RT+3ºC~60ºC
Temperature fluctuation in incubation chamber ±0.3ºC
Temperature balance in incubation chamber ±1ºC
Power Rate 220V,50HZ/600W
Net/Gross weight(kg) 240/320
Internal Dimension of Incubation Chamber(cm) 30×19×29
Dimension of Operation Chamber(cm) 80×65×65
Overall Dimension(cm) 126×73×138
Package Size(cm) 139×92×156
 

Custom Metal Stamping Services 

Jiantong Hardware offers custom Metal Stamping services from prototype through production quantities. We run stamping in a variety of metals include Mild steel, stainless steel, aluminum, brass, copper and metal alloy. Thickness we`re able to proceed ups to 0.315"(8mm) thick, but our specialty is .008"(2.0mm)-.236"(6.0mm) thick with high-volume and tight tolerance. Our presses have full feed lines and are die sensor protection ready. We run nearly 60 million stampings per year at a 95% on time delivery rate. progressive die metal stamping

Our mould type include progressive and single hit dies, presses capabilities range from 8 tons to 400tons. We promise all our products are fully inspected using vision systems, optical comparators, CMM equipment and functional gauges before shipment. Industries we have served include aerospace, medical, automotive, home appliance and electronics.

Other advantages:

· In-house tooling, gauge and fixture building

· Free samples will be offered on request

· We support prototype and lower MOQ

· 4 years of gold supplier in alibaba provides full guarantee of trade transactions

· Inspection processes capable of first article, PPAP, collecting CPK data, lot controlling and functional checks


With Wire EDM, CNC lathe, CNC machining, Grinding and milling, we can be a single source for your assembly and sub-assembly needs.  Reach us today and save your money !

Stamping Parts

Stamping Parts,Precision Metal Stamping,Custom Stamping Parts,Aluminum Stamping

Nanpi Jian Tong Hardware Manufacturing Co., Ltd. , https://www.jiantongstamping.com