July 03, 2025

New quick attack unit for Alsip (more)

Posted on

From mcbfire.com:

Here's a look at the new 11′ Spitfire Quick Attack pumper recently delivered to the Alsip Fire Department:

11′ SPITFIRE QUICK ATTACK – ALSIP FIRE DEPARTMENT

  • 2022 Ford F-550 Crew Cab 4×4 Chassis
  • 11’ All-Aluminum Body & Subframe with a 10-Year Body Warranty
  • Multiplex Electrical System with Center Cab Console Control
  • ROM Series IV Roll-Up Doors and Compartment Lighting
  • Federal Signal LED Warning and Scene Lighting
  • Federal E-Q2B Siren
  • Federal Signal Navigator 53” Lightbar
  • Fire Research Spectra MS LED Side Mount Push Up Telescopic Lights
  • Uni-Strut Channels, All Exterior Compartments with Adjustable Shelves and Trays
  • L1/R1 Floor Extensions, Vertical Dividers, and Adjustable Shelves
  • L1/R1 Transverse Compartment Slidemaster Dual Direction Trays with Adjustable Vertical Dividers
  • L2/R2 Adjustable Shelf
  • L3/R3 Adjustable Shelves
  • Buckstop Front Bumper with Turret Mount
  • Rear Backing Camera and Alarm
  • Hannay Booster Reel
  • Kussmaul Battery Charger, Power Inverter, and Auto-Eject
  • Trailer Hitch and Lighting Package
  • Skid Unit C.E.T. Honda 20-HP Gas Pump, with 300 Gal Water Tank

This new apparatus is built for speed, durability, and efficiency—perfect for quick response situations. The all-aluminum construction ensures long-lasting performance, while the advanced electrical system and lighting make it highly functional in any condition.

#MCB; #WardFireApparatus; #chicagoareafire.com; #AlsipFD; #FireTruck;#MCB

MCB photo

#MCB; #WardFireApparatus; #chicagoareafire.com; #AlsipFD; #FireTruck;#MCB

MCB photo

#MCB; #WardFireApparatus; #chicagoareafire.com; #AlsipFD; #FireTruck;#MCB

MCB photo

#MCB; #WardFireApparatus; #chicagoareafire.com; #AlsipFD; #FireTruck;#MCB

MCB photo

Thanks Martin

Casting Specific Sulfurizing Agent

When smelting sulfur-containing and easy to cut steel, ferrous sulfide is used to increase the sulfur content of the steel liquid.
The main component of ferrous sulfide is FeS, with a theoretical sulfur mass fraction of 36.4%. The melting point of pure FeS is 1190 ℃, and the density is 4.79/. The grade of industrial pure ferrous sulfide is FeS with a mass fraction of 80% to 85%. Using ferrous sulfide as an additive for sulfur has a higher recovery rate than using sulfur, and it does not pollute the environment. When using ferrous sulfide to increase sulfur, it can be directly added to the surface of the steel liquid, or wrapped with aluminum foil or iron sheet and inserted into the interior of the steel liquid or added to the steel flow or ladle. Its recovery rate is high and stable.

Vulcanizing Agents,Premium Vulcanizing Agent 10-50 Mesh,Sulfur Enhancing Agents

LUANCHUAN COUNTY HENGKAI METALLURGICAL MATERIALS SALES CO.,LTD , https://www.pyritechina.com