TIG-315p Inverter Mosfet AC/DC TIG/MMA Welding Machine

1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
4. Has connector to foot control, convenient for workers' operation.
5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
6. High duty cycle, may work continuously with high current.
7. Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.

Parameter/Specification
 

Model Item     Â	TIG 315P AC/DC
Voltage(V)	AC380V ±15%
Frequency(Hz)	50-60
Input Power(KVA)	8.3
No-load Voltage(V)	54
Current Range(A)	10-300
Rated Duty Cycle	60%
Applied Welding Rod(mm)	¢1.6-5.0
Pre-flow time(S)	2
Post-flow time(S)	0-10
Down slope(S)	0-10
AC Balance(%)	20-80
AC Frequency(Hz)	60
Pulse Frequency(Hz)	0.5-300
Power Factor	0.93
Efficiency(%)	85
Insulation Grade	F
Housing Protection Grade	IP21S
Weight(Kg)	30
(L*W*H)(mm)	535*360*460
Carton CBM(m3)	0.172
Specification
 Capacitor	470Uf/400V*6
MOSFET	TOSHIBA K3878*24
Output Rectifier	SL D92-02*24

                                     Front View 







                                                     Right View 








                                                  Left View 










                                                            Top View 











                                                                               Back View 








                                                                  Accessories








 

1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filler wire welding in bicycle industry.
3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
4. Has connector to foot control, convenient for workers' operation.
5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
6. High duty cycle, may work continuously with high current.
7. Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.

Parameter/Specification
 

Model Item     Â	TIG 315P AC/DC
Voltage(V)	AC380V ±15%
Frequency(Hz)	50-60
Input Power(KVA)	8.3
No-load Voltage(V)	54
Current Range(A)	10-300
Rated Duty Cycle	60%
Applied Welding Rod(mm)	¢1.6-5.0
Pre-flow time(S)	2
Post-flow time(S)	0-10
Down slope(S)	0-10
AC Balance(%)	20-80
AC Frequency(Hz)	60
Pulse Frequency(Hz)	0.5-300
Power Factor	0.93
Efficiency(%)	85
Insulation Grade	F
Housing Protection Grade	IP21S
Weight(Kg)	30
(L*W*H)(mm)	535*360*460
Carton CBM(m3)	0.172
Specification
 Capacitor	470Uf/400V*6
MOSFET	TOSHIBA K3878*24
Output Rectifier	SL D92-02*24

                                     Front View 







                                                     Right View 








                                                  Left View 










                                                            Top View 











                                                                               Back View 








                                                                  Accessories








 

Induction Cooker Ceramic Glass

Ceramic Induction Cooker,Induction Cooker Ceramic,Glass Induction Cooker,Induction Cooker Ceramic Glass

Guangdong Puda Electrical Appliance Co., Ltd. , https://www.elecapoka.com