1. Concrete Spun Pile Mould:
Concrete Spun Pile Mould is a kind of steel mould, it is mainly apply to Concrete Spun Pile Plant to produce the Centrifugal Reinforced Technology (PHC ) Concrete Spun Pile, In order to meet customer's requirement to produce high strength PHC concrete pile, Jiangsu Haiheng Company have long term cooperation relationship with Japan spun pile factories for improve the design and technology of mould and use advanced processing equipment, HH's spun pile mould has got the leader market share in the countries like Japan, Vietnam, Indonesia, Malaysia, Thailand, Myanmar, Cambodia etc.
Our Mould Advantages:
1. Mould's tongue-and-groove is designed by the dislocation of upper and lower shell boards, matchboard is plane surface. Slurry does not leak and it is easy to clean mould.
2. The tyre is "T" type forgings. Tyre and its support plate are as whole.
3. Self-developed six-meter press machine of mould inside shell. The inside shell seam extends from two meters to six meters, to minimize welds and mould strength and improve the external appearance of the products
4. Welding process uses CO2 arc shield weld which makes its appearance simple and weld seam neat. Our company cooperated with colleges to introduce [robot welding project".
5. Long lathe, manufacture the whole set mould under fifteen-meter length, greatly increases concentricity of the tyre and flange.
Spun pile Mould Specification:
Inside diameter(mm)
Wheel base(mm)
Wheel Diameter(mm)
Length(mm)
Ø300
2000
510
7-11
Ø350
2000
610
7-11
Ø400
2000
610
7-12
Ø450
2000
710
7-12
Ø500
2000
710
7-12
Ø550
2000
810
7-12
Ø600
2000
810
7-15
Ø800
2000
1010
7-15
Ø1000
2000
1210
7-15
If you have any questions, please contact with us directly. Concrete Pile Moulds are produced by High Quality and Esay transportation, quick assembling, good rigidity and smooth working. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Spun Pile,Reinforced Concrete Spun Pile Mould,Phc Spun Pile Mould,Pretensioned Concrete Spun Pile Mould Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com
Because Qijun's appearance is too tough, and Qashqaw belongs to a relatively small SUV, Dongfeng Nissan urgently needs to launch a city SUV similar to the Highlander, CR-V and other models, the appearance of stylish, atmospheric beauty slaves become the first choice.
Merino is a medium-sized SUV model introduced by Nissan in 2002. Its current model is its second generation. The domestically-made Nissan American slaves made minor changes on the basis of the 2011 model. Compared with foreign versions, the domestic version of the bumper under the air intake is larger than the foreign version. In terms of body size, the domestic beauty slaves are identical to the foreign version, with a length, width and height of 4860/1885/1730 mm and a wheelbase of 2825 mm. Compared with Toyota Highlander, the body size of the slaves is longer.
Next year, Dongfeng Nissan's second plant will be officially put into production, and production capacity will be greatly improved. It will become inevitable that domestic sales will be promoted through the use of slave models such as slaves. In the future, the slaves will inevitably launch 2.3L models, which will lower the price to below 300,000 yuan. . 
In the future, domestic Dongfeng Nissan will push SUV beauty slaves in the second half of the year
The reporter learned from Dongfeng Nissan that it will launch a new SUV beauty slave in the second half of the year. This new vehicle equipped with a 3.5L V6 engine will be imported first and will be made in the future.