[Advantages of α-linolenic acid compared to DHA]
DHA (brain gold) is one of the derivatives of α-linolenic acid. Supplementing α-linolenic acid has advantages over directly supplementing DHA:
Different medical importance: α-linolenic acid is an important nutrient in the 21st century. It is an unsaturated fatty acid necessary for the body. The human body cannot directly synthesize it by itself and must be ingested from the outside world. DHA is not. The human body's own regulation is different: α-linolenic acid is the precursor of DHA, which can provide DHA to the maximum extent according to the human body's needs. However, direct supplementation of DHA is a strong supplement that the human body cannot control itself and is prone to negative effects. Applicable to different groups of people: α-linolenic acid is helpful in regulating blood pressure, blood lipids, and blood sugar, while DHA comes from fish oil. Pregnancy-induced hypertension inevitably contains animal cholesterol, and women with gestational hypertension, obesity, and overweight cannot use it. use. The "Usage" of the secondary directory is modified to:
Direct drinking: average daily dose of 5-10 ml; drop on warm rice, bread or steamed buns, reduce to 1-5 ml for children.
Smart salad dressing: Add to cold dishes or salads.
Soup seasoning: drop into cooked porridge, soup, and milk.
Baked pastries: Use organic nutritious oils instead of hydrogenated oils or butter in baked pastries.
Homemade preparation: mix it with ordinary edible oils such as soybean oil, peanut oil or rapeseed oil in a ratio of 1:5-1:10 before consumption.
Secret combination: Take 5-10 ml of nutritious oil and mix it with sugar-free homemade yogurt or sugar-free yogurt before eating. It is a popular anti-cancer food therapy in Europe and the United States.
100% Pure Natural Perilla Seed,Perilla Seed In Chinese,Perilla Seed In Korean Jilin Chunyi Industrial Co., Ltd , https://www.jlxytruckpart.com
Techincal data:
Fluid Pressure
Max 1.6MPa (232Psi)
Control Pressure
0.3 - 0.8MPa(43.5-116psi)
Control Fluid
Neutral gas, air
Body Material
CF8M/CF8
Seals  Material
EPDM/FKM
Applicable Fluid
FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc.
Fluid Temperature
 -20ºC - +150ºC
Ambient Temperature
-20ºC - +80ºC
Control Type
Normally closed,Normally open,Double acting
Connection
Threaded(BSP,BSPT,NPT )
Advantages:
Small shape, large flux;
Perfect sealing, vacuum tightness 740mmHg (Mercury);
Any mounting position acceptable (horizontal, vertical, oblique).
Size: DN8 - DN50 (1/4" ~ 2")
Connection: BSP or NPT threaded
Control Type: Single acting, double acting
Body Material: CF8M (AISI316) or CF8 (AISI304)
Seat:
EPDM: Perfectly suitable for hot water and steam, unsuitable for mineral products (oils, greases, fuels etc. );
VITON (FKM): Perfectly suitable for most fluid, unsuitable for steam;
Fluid Pressure: Max 1.0MPa (10bar, 232Psi)
Fluid Temperature: -10 - +130ºC
Max. Viscosity: 600 mm2/s
Control Fluid: Neutral gas, air
Control Pressure: 0.3 - 0.8MPa.
CONTACT US
Techincal data:
Fluid Pressure
Max 1.6MPa (232Psi)
Control Pressure
0.3 - 0.8MPa(43.5-116psi)
Control Fluid
Neutral gas, air
Body Material
CF8M/CF8
Seals  Material
EPDM/FKM
Applicable Fluid
FKM-Suitable for most fluid,except for steam. EPDM-Suitable for steam and hot water,unsuitable for oils,greases,fuels etc.
Fluid Temperature
 -20ºC - +150ºC
Ambient Temperature
-20ºC - +80ºC
Control Type
Normally closed,Normally open,Double acting
Connection
Threaded(BSP,BSPT,NPT )
Advantages:
Small shape, large flux;
Perfect sealing, vacuum tightness 740mmHg (Mercury);
Any mounting position acceptable (horizontal, vertical, oblique).
Size: DN8 - DN50 (1/4" ~ 2")
Connection: BSP or NPT threaded
Control Type: Single acting, double acting
Body Material: CF8M (AISI316) or CF8 (AISI304)
Seat:
EPDM: Perfectly suitable for hot water and steam, unsuitable for mineral products (oils, greases, fuels etc. );
VITON (FKM): Perfectly suitable for most fluid, unsuitable for steam;
Fluid Pressure: Max 1.0MPa (10bar, 232Psi)
Fluid Temperature: -10 - +130ºC
Max. Viscosity: 600 mm2/s
Control Fluid: Neutral gas, air
Control Pressure: 0.3 - 0.8MPa.
CONTACT US
Pneumatic Axial Valve NPT Thread Ends
Model NO.: 200 Series
Ambient Temperature: -20ºC - +80ºC
Control Type: Normally Closed,Normally Open,Double Acting
Connection: Threaded(Bsp,BSPT,NPT )
Trademark: ESG
Transport Package: Seaworthy or Airworthy
Specification: CE, ISO9001, CU-TR
Origin: China
HS Code: 8481
Model NO.: 200 Series
Ambient Temperature: -20ºC - +80ºC
Control Type: Normally Closed,Normally Open,Double Acting
Connection: Threaded(Bsp,BSPT,NPT )
Trademark: ESG
Transport Package: Seaworthy or Airworthy
Specification: CE, ISO9001, CU-TR
Origin: China
HS Code: 8481