March 29, 2024

What are the national policies for the parts and components industry in 2015?

Regardless of which industry, the national policy is the vane that guides the development of the industry, especially for the pillar industry of the automobile.

Component industry as the basis of the automotive industry, its growth and development direction are also closely related to the guidance of the national policy, the introduction of each new policy will attract the attention of industry and industry, the policy guides the adjustment of the industrial structure, change The industry product pattern is the focus of all companies, including parts and components companies.

In view of the importance of the policy message, on the occasion of the end of the year, special policies and guidelines for the auto parts sector since 2015 were organized to enable companies to have an overall and comprehensive understanding of the policy in this area.

Car navigation audio and video system technical specifications released

On January 22, the "Technical Code for the Certification of Car Navigation Audio/Video Systems" (hereinafter referred to as the "Code"), co-sponsored by China Automotive Information Industry Promotion Industry Alliance and Shenzhen Automotive Electronics Industry Association, was held in Shenzhen Civic Center.

This "Specification" was jointly drafted and developed by a number of enterprises in the industry under the joint advocacy and promotion of the Shenzhen Automotive Electronics Industry Association, the China Automotive Information Industry Promotion Industry Alliance (CFAI), the China Quality Certification Center, and the Ministry of Industry and Information Industry. .

It is a milestone industrial standard that has been participated by companies, universities, and authoritative organizations for more than two years. It has broken the predicament of unmandable standards for many years and has achieved new breakthroughs in the development of the car navigation audio-visual industry.

Ministry of Industry and Information Technology: Published "Interim Measures for the Administration of Announcement of Tire Manufacturers"

On January 26, in order to strengthen the management of the tire industry and standardize industry access, the Interim Measures for the Administration of the Announcement of the Tire Manufacturers issued by the Ministry of Industry and Information Technology was released and implemented on March 1, 2015.

The measures apply to enterprises within the territory of the country (excluding Hong Kong, Macao and Taiwan) automobile tires (without bias tires) and construction machinery tire production equipment.

The regulations stipulate that the tire production enterprise that has applied for an announcement should have an independent legal person qualification, meet the tire industry access requirements, and have no major violations.

Ministry of Industry and Information Technology: Published "Standard Conditions for Automotive Power Battery Industry"

On March 24th, the Ministry of Industry and Information Technology released the "Automotive Battery Industry Specification Conditions."

According to the specification, the annual production capacity of lithium ion power battery single-unit enterprises shall not be less than 200 million watt-hours, and the annual production capacity of single-unit enterprises of metal hydride nickel power battery shall not be lower than 10 million watt-hours, and the annual output of ultracapacitor single-unit enterprises Capability must not be less than 5 MWh. The annual production capacity of the system enterprises must not be less than 10,000 sets or 200 million watt-hours.

"Made in China 2025" is officially released to clearly plan the ten key areas

On May 19, the “Made in China 2025” plan was formally released.

"Made in China 2025" requirements, "continue to support the development of electric vehicles and fuel cell vehicles, master the car's low-carbon, information, intelligent core technology, improve power batteries, drive motors, high-efficiency internal combustion engines, advanced transmissions, lightweight materials, intelligent control The engineering and industrialization capabilities of core technologies, the formation of a complete industrial system and innovation system from key components to complete vehicles, and the promotion of self-owned brand energy-saving and new energy vehicles are in line with international advanced standards.

Ministry of Industry and Information Technology: Published "Management Requirements for Automobile Hazardous Substances and Recyclable Utilization Ratio"

On June 9th, the Ministry of Industry and Information Technology released the “Management Requirements for Automotive Hazardous Substances and Recyclability and Utilization” announcement, which puts forward higher requirements for auto parts and materials suppliers at all levels: as of January 1, 2016 The management of the use of hazardous substances and recyclability of passenger vehicles (Class M1) with no more than nine seats in total.

This will play an important role in promoting the transformation of the automobile industry's production methods and consumption patterns to green, low-carbon, clean and safe, and enhancing the international competitiveness of China's automotive products.

Parts and Remanufactured Products “Start Old”

August 11, at the China Association of Automobile Manufacturers Information Conference, by the National Development and Reform Commission, Ministry of Finance, the Ministry of Commerce, General Administration of Quality Supervision, Inspection organization and implementation of remanufactured products "and then change the old" pilot project, officially started in the country.

Car remanufacturing
Remanufacturing of parts

At present, the Ministry of Finance has allocated advance funds to various places. This marks that since the “old-for-for-new” pilot program was launched in 2013, another boots “for the old one” has finally landed.

The parts and components that were included in the "old-for-for-new" pilot program were automobile engines and transmissions. The state reimbursed the eligible automobile engines, transmissions and other remanufactured products at a subsidy of 10% of the replacement price, and the highest subsidies for remanufactured engines were produced. 2000 yuan, re-manufactured transmission subsidy up to 1,000 yuan.

Child safety seat "3C" certification implemented in September

On August 26th, AQSIQ stated that on September 1st, mandatory "3c" certification for safety seat products was implemented, and "3c" certification and motor vehicle child safety without "3c" certification mark were not obtained. Seats will not be manufactured, sold, imported, or used in other business activities.

This is the introduction of national compulsory regulations after the children's compulsory use of safety seats in Shanghai, Shandong, and Shenzhen were written into local regulations and regulations.

Two ministries and commissions: Issued the "Policy for Recycling and Utilization of Electric Vehicle Battery (2015 Edition)" Consultation Draft

On September 11, the National Development and Reform Commission and the Ministry of Industry and Information Technology issued the “Regulation on the Recycling and Utilization of Electric Vehicles Power Battery (2015 Edition)” (Draft for Comment) (referred to as “Draft for Comment”).

It is required that the recovery and utilization of power storage batteries should be implemented in accordance with the principle of reducing resource consumption and waste generation on the premise of being technically feasible, economically reasonable, ensuring safety, and being conducive to resource conservation and environmental protection.

National standards for unified coding of parts and components will be implemented in 2016

On September 11, the National Standards Committee approved the release of the GB/T 32007-2015 National Standard for the Uniform Coding and Labeling of Automotive Components Drafted by the China Article Numbering Center and the China Association for Automatic Identification Technology. Formally implemented on the 1st of the month.

The standard stipulates the general principles for coding principles, data structures, symbol representations, and their locations for the uniform coding of automotive parts. It is suitable for the compilation of uniform codes and logos for auto parts (accessories), and information collection and data exchange for auto parts (accessories).

It provides technical means for standardizing the auto repair market, improving corporate management efficiency, reducing operating costs, and enabling the establishment of consumer parts inquiries and the traceability of parts.

Eight ministries and commissions: Issued "Administrative Measures for the Implementation of Open Maintenance of Automobile Maintenance Technology Information"

On September 14, the Department of Transportation, the Ministry of Environmental Protection, the Ministry of Commerce, and the State Administration for Industry and Commerce jointly issued the "Administrative Measures on the Implementation of Open Maintenance of Automobile Maintenance Technology Information" (referred to as "Measures"). The "Measures" have been issued since January 1, 2016. Starting from the day of implementation, it is clear that automakers should use online information disclosure methods to disclose the maintenance technical information of the vehicles they sell.

Two Ministries: 8 Tire Related National Standards Released

On October 20th, the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China and the National Standardization Administration issued the No. 25 announcement, approving 354 national standards, among which there are 8 national standards related to the tire industry.

Ministry of Industry and Information Technology: Published "Administrative Measures for Lithium-ion Battery Industry"

On November 3, the Ministry of Industry and Information Technology organized the preparation of the “Provisional Measures for the Administration of the Lithium Ion Battery Industry Specification Announcement (Draft for Soliciting Opinions)”.

The Opinions pointed out that in order to promote the healthy and orderly development of the lithium-ion battery industry, guide the industry to accelerate the transformation and upgrading, and implement the "Lithium-ion battery industry regulatory conditions," the formulation of the measures.

Ministry of Industry and Information Technology: "Standard conditions for internal combustion engine industry" implemented on January 1, 2016

On November 25th, the Ministry of Industry and Information Technology of the State Council organized the "Opinions of the General Office of the State Council on Further Strengthening the Energy-saving and Emission Reduction of the Internal Combustion Engine Industry" (Guobanfa [2013] No. 12) and formulated the "Regulations for Internal-combustion Engine Industry" (abbreviated as " Specification conditions), implemented on January 1, 2016.

The "Regulations" states that the State encourages and supports the research, development, production, promotion and application of advanced, safe, reliable, energy-saving and environmentally friendly internal combustion engine products, and establishes and improves internal combustion engine safety, environmental protection, energy conservation standards, and safety production regulations.

For manufacturing enterprises that meet the regulatory requirements, relevant national and local authorities may provide relevant policy support; and priority is given to the selection of manufacturers of transportation vehicles, construction machinery, agricultural machinery, and fixed devices that use internal combustion engines as supporting power.

General Administration of Quality Supervision: Promulgating the "Implementation Measures for the Management of Defective Auto Product Recall Regulations"

On November 27, the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China issued the Measures for the Implementation of Regulations on Recall of Defective Automobile Products. It shall be implemented as of January 1, 2016, and the “Regulations on the Recall of Defective Automobile Products” shall be abolished at the same time.

It is understood that the "Measures" were formulated on the basis of the "Regulations on the Revocation of Defective Automobile Products" implemented on January 1, 2013, and some of the provisions of the "Regulations" were refined.

The "Measures" further clarified that the producers of automotive products are the main recallers of defective automotive products. Manufacturers are required to keep the design, manufacture, and inspection information of producers and parts of auto parts and components involved in safety.

Ministry of Finance: China adjusts import and export tariffs as of January 1, 2016

On December 10th, it was reviewed by the Customs Tariff Commission of the State Council and reported to the State Council for approval. Since January 1, 2016, China will make partial adjustments to import and export tariffs.

In order to promote the steady growth of imports and exports, strengthen the import of advanced technologies, products and services, increase effective supply, and promote domestic independent innovation and industrial structure optimization and upgrading, tariff adjustment in 2016 will continue to encourage domestic advanced equipment, key components and energy raw materials needed urgently. import.

To reduce the import tariffs of high-speed electric locomotives such as traction converters, TV camera image acquisition modules, motor controllers for pure electric or hybrid vehicles, chrome-free tanning agents, and cattle and sheep fats, etc., at a tentative tax rate.

Ministry of Industry and Information Technology: The 2015 version of lead battery specifications and management measures introduced

On December 10, the Ministry of Industry and Information Technology released an announcement stating that in order to further regulate the management of the lead-acid battery industry and accelerate the adjustment of the industrial structure and transformation and upgrading, the "Entry of Lead-acid Battery Industry" and the "Provisional Measures for the Administration of Entry Approval of Lead-acid Storage Battery Industry" will be revised. The "Provisions for Lead Batteries (2015)" and "Interim Measures for the Administration of Specification of Lead Batteries (2015)" have been formed.

The new regulations have made strict regulations on battery companies' construction applications, production capacity, technological level, and environmental protection.

"Lead-battery industry norms" compared with the previous old regulations, there is a clear requirement on environmental protection and occupational disease protection, for many small factories that do not meet the standard, this specification is a tight curse, if you do not change will face closure.

  Sheet metal by manually or stamping mould make its produce plastic deformation, forming the desired shape and size, and can be further by welding or a small amount of machining to form more complex parts, such as chimney is commonly used in family, tin furnace, and motor shell are sheet metal parts. The process we are able to do laser cutting, bending ,welding,powder coating and assembling. 


 

Cnc Bending Stainless Steel

CNC bending stainless steel,cnc machining bending parts, cnc bending part

Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com