October 22, 2021

The correct operation method of the sprinkler pump

After the winter has passed, the rain and snow in the north are freezing more and more. The sprinklers that have finished working one day must pay attention to the spoiler water pump freezing. You have to remember to release the water. At the same time, you must know the correct operation method of the sprinkler pumps below to ensure the safety of the vehicle. winter.


First, the start of the sprinkler sprinkler pump

1. Connect the relevant pipeline, start the engine, step on the clutch pedal, open the power lever operation switch, and make it open. (When the road sprinkler is before the water is absorbed or before the water is sprinkled, the power take-off gear must be stopped at the time of parking)

2. Through the throttle controller, the working speed of the sprinkler can be controlled.


Second, the sprinkler sprinkler stops

Push the throttle controller to minimize the speed. Press the clutch pedal to pull the power take-off control switch back to the original position to disengage the power take-off box.

Third, the inspection of the sprinkler sprinkler after use

1. Check if the power take-off control switch is back and check if the throttle controller is at the minimum position.

2. Check the position of the valve handle, which should be closed.


The above three points must be operated correctly according to the regulations. The most important thing is to freeze the ice in winter. If you are in a long period of downtime, please remember to let go of the remaining water, and you must put it clean to prevent freezing and freezing.

Sprinkler national unified sales hotline (WeChat same number)

Steel wire welding machine

Steel wire welding machine wire drawing machine adopts servo motor wire drawing device to make wire drawing size more standard and accurate.
Variety of weldable mesh.
Zonal grid adjustment related parts are adjustable, by the adjustment of the grid microcomputer control, can set up different grids.

Performance characteristics of steel wire welding machine: the length of warp and weft wire of tunnel support network welding machine are pre-cut by straight cutting machine. The warp is manually placed to the feeding mechanism and automatically entered by the servo feeding trolley without manual placement.
The weft wire is manually placed into the discharging device by the turntable stripper and dropped by a single one.
The welding system adopts pulse triggered thyristor with 8-way voltage regulation, and 8-way output can be combined at will, so as to reduce the impact on power transformer and effectively improve efficiency.
The machine power system is divided into pneumatic type and mechanical type.
The whole machine adopts PLC centralized control. The touch screen is the external data input part. All parameters can be input by the touch screen.
Rebar mesh welding machine

Rebar Mesh Welding Machine

Wire Mesh Welding Machine,Fence Mesh Welding Machine,Rebar Mesh Welding Line,Wire Butt Welding Machine

Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com