Recently, our city is full of activities to create health and creativity, and the first thing to do urban beautification is to build roads. If you want to repair the road well, you can't do without the use of a 2 ton driving roller. Let's take a look at how the roller is used. 1. Whether it is uphill or downhill, the bottom layer of the asphalt mixture must be clean and dry, and the asphalt binder layer must be sprayed to avoid slippage of the mixture during rolling. 2. Whether it is uphill crushing and rolling down the old slope, the driving wheel of the roller should be behind. This has the following advantages: when going uphill, the rear drive wheel can withstand the driving force provided by the ramp and the machine itself, while the front wheel preliminarily compacts the road surface to withstand the large shear force generated by the drive wheel. When going downhill, the impact force generated by the self-weight of the roller is offset by the braking of the driving wheel. Only the mixture after rolling by the front wheel has the ability to support the driving wheel to generate shearing force. 3. When rolling uphill, the starter, stop and acceleration of the roller should be stable, avoiding too high or too low speed. 4. Before the uphill rolling, the mixture should be cooled to the specified low temperature, and then static preloading is carried out. When the temperature of the mixture drops to the lower limit (120 °C), the vibration compaction is adopted. 5. Downhill rolling should avoid sudden shifting and braking. 6. When rolling downhill under steep slope conditions, the light roller should be used for pre-pressing, and then compacted by heavy-duty roller or vibratory roller. How is the 2 ton driving roller used? The 2 ton driving roller is a kind of mechanical equipment. All mechanical equipment must be well maintained, so that it can grow its life. Let's take a look at how the 3 ton driving roller is maintained. 1. The road roller checks the tire pressure and damage; 2. The road roller checks the instrument and the light; 3. Press the butter at each hinge point; 4. The road roller checks for oil, water, gas leakage and signs of overheating of the machine; 5. The roller checks the diesel engine oil, coolant and hydraulic fluid levels.
Matting Agent the basis materials is
Silicon Dioxide; it is synthetic amorphous silica appearing as white powder.
It could use for solvent based and water based systems. Matting Agent as a pigment
most use to reduce the gloss of variety of coatings like wood coatings, inks,
industrial coatings, coil coatings, plastic coatings, UV curing coatings,
leather coatings, E-coats ,matte paper coatings and powder coatings. It
provides a superior matting efficiency, excellent coating appearance and
transparency, effective anti-settling agent and easy dispersion, smooth,
abrasion resistant ï¬lms of high surface quality. We focus on the matting
agent about 25 years, knowing exactly the customer`s requirement, and have most
experience to offer service and technical solution to the customers. We have
strict control of the quality; the physical index and performance are strictly
tested before delivery. Will ensure that stable products of different batch.
Compare to International and the other Chinese Supplier, our products has better
performance, stable quality and cost efficient.
Matting Agent,Silica Matting Agent,Precipitated Silica Matting Agent,Powder Coating Matting Agent Guangzhou Quanxu Technology Co Ltd , https://www.skychema.com
The above is the use of the 2 ton driving roller. Do you understand? For more information, please call for detailed consultation. (This article is from Situ Rick)
