March 29, 2024

Metallurgical term

1, sintering sintering

A powder or compact heat treatment at a temperature below the melting point of the main component, object by metallurgically bonding between the particles to increase its strength.

2 , packing packingmaterial

A material in which a compact is embedded during the pre-firing or sintering process for separation and protection.

3 , pre-burning presintering

The heat treatment of the green compact is carried out at a temperature lower than the final sintering temperature.

4 , pressure sintering pressure

A sintering process that applies uniaxial pressure while sintering.

5 , loose- sintered loose-powdersintering, gravitysintering

The powder is directly sintered without pressing.

6 , liquid phase sintering liquid-phasesintering

The powder or compact having at least two components is sintered in a state in which a liquid phase is formed.

7 , overburning oversintering

Sintering where the sintering temperature is too high and/or the sintering time is too long to deteriorate the final properties of the product.

8 , underburning undersintering

Sintering where the sintering temperature is too low and/or the sintering time is too short to cause the product to fail to achieve the desired properties.

9 , infiltration infiltration

A process for filling pores in an unsintered or sintered article in a molten state with a metal or alloy having a melting point lower than the melting point of the article.

10 , dewaxing dewaxing , burn-off

The organic additive (binder or lubricant) in the compact is discharged by heating.

11 , mesh belt furnace meshbeltfurnace

A mesh belt, which is generally protected by a muffle, implements a continuous furnace for the continuous conveyance of the furnace.

12 , walking beam furnace walking-beamfurnace

A sintering furnace in which a part placed in a sintering disk is conveyed in a furnace by a walking beam system.

13 , pusher furnace pusherfurnace

A sintering furnace in which parts are placed in a burning boat and the parts are conveyed in a furnace through a propulsion system.

14 , sintered neck forming neckformation

A neck-like bond is formed between the particles during sintering.

15, blistering blistering

Due to the violent discharge of the gas, bubbling is formed on the surface of the sintered part.

16 , sweating sweating

The phenomenon of liquid phase oozing out during the heat treatment of the green compact.

17 , sintered shell sinterskin

When sintered, a surface layer formed on the sintered part has properties different from the inside of the product.

18 , relative density relativedensity

The ratio of the density of the porous body to the density of the same component material in the non-porous state is expressed as a percentage.

19 , radial crush density radialcrushingstrength

The burst strength of the sintered cylindrical specimen measured by applying radial pressure.

20, porosity Porosity

The ratio of the volume of all pores in the porous body to the total volume.

21 , diffusion pore diffusionporosity

A component material due to the Kirkendall effect diffuses into the pores formed in another component.

22 , pore size distribution poreizedistribution

The percentage of the pore size of each stage present in the material as a function of quantity or volume.

23 , apparent hardness apparenthardness

The hardness of the sintered material measured under specified conditions, which includes the effect of the pores.

24 , solid hardness solidhardness

The hardness of a phase or particle or a region of the sintered material measured under specified conditions, which excludes the effect of the pores.

25 , foaming pressure bubble-pointpressure

The minimum pressure required to force the first bubble by the gas through the liquid impregnated article.

26 , fluid permeability fluidpermeability

The amount of liquid or gas passing through the porous body per unit time measured under specified conditions.

Bone Crusher:

1. This hot sale animal bone mill crsuher machine price, we have two types: stainless steel and ordianry type, you can choose freely.

2. This cutting type machine is used for all kinds of hard materials; It is also used for crushing conventional materials.

3. This bone mill crusher can be used for kinds of bones, such as pork bone, cow bone, bull bone, chicken bone, beef bone.

We mainly manufacture: meat processing machines, milk processing machines, egg processing machines, fruit vegetable machines etc. We have years of exporting experiences, sincerely hope for copperation!
Cow Bone Crusher

Bone Crusher

Bone Crusher,Bone Crushing Machine,Beef Bone Crusher,Pork Bone Crusher

Henan Gems Machinery Co.,Ltd , https://www.gemsmachine.com