March 28, 2024

What should you watch out for when unloading dump trucks?

A grievous accident occurred on July 10, 2016. When a truck driver unloaded goods from a farm truck driver in Dao County, Hunan Province, he did not look around to see if there were any obstructions around him. He touched the high-voltage cable and the driver was on the spot. Being electrocuted, the tragedy finally occurred.

In fact, we can know from the above incident that the driver himself is not clear what matters to pay attention to when unloading, casually rashly raise the body of the car, but also let their own life forever stop. Today Xiao Bian told everyone about what matters should be paid attention to when unloading dump trucks .

1. Before unloading, you must check if there are obstacles around the 5 meters of the vehicle. Whether it is personnel or power poles are obstacles, the driver should drive to the safe zone to carry out some goods, otherwise it will happen that the aforementioned accident, as long as I have a long snack, I think this situation can be avoided. No one wants to joke about his life.

2. The unloading ground should be leveled. Almost all truck drivers need to open to the flat ground to dare to carry out the operation. This is also a problem that the dump truck driver should pay attention to first. The ground on the dump site must be flat, especially if it cannot be deflected. If the center of gravity shifts after the dump truck's container is raised, a large center deviation will occur and it is very prone to rollover.

3. The ground should be solid to prevent car trapping. There is also a possibility that a flat road surface is heavy. The dump truck is heavy and the ground is soft. After the lift, the force on the rear wheel becomes larger and the side tires subside. In response to this situation, the suggestions given by netizens are more attention when unloading the car. When the bucket is half up, pay attention to check whether the tires on both sides are trapped. It is advisable that one person assist in watching the hydraulic pressure outside the car. The cylinder has no inclination. If there is a tilt, use a slow gear to lower the top and change to a stable place.

4. After the bucket is opened, the location of the unloading site has to be paid attention to by the driver. The first step is to open the rear bucket. It seems very simple and does not require reminding knowledge, but there are many accidents because of this There was a rollover situation. If you do not pay attention to forget to open, after raising the body of the car, the center of gravity of the entire vehicle will rise and the road surface will be uneven. The consequences will be serious!

5. To prevent the top of the door from being damaged, the dump truck is now much more loaded, and the unloading volume is also large. The driver should also pay attention to prevent the top of the door from being unloaded to the goods. In fact, the driver should pay attention to the overload, must download the goods in the vehicle's maximum load, if overloaded, the consequences could be disastrous.

These few small details, many drivers are aware of, but in the operation often due to their negligence resulted in serious consequences of the accident, I hope that each driver in strict accordance with these precautions require themselves to their own lives Put in the first place.


EXW is a Taiwanese professional manufacture specialized in Modular Plugs for more than 30 years, and we supplied OEM & ODM case for many big branded customers. Today, our monthly shipment for Modular Plugs is larger than 30,000,000 PCS.

Besides, our Modular Plugs are RoHS & REACH compliant. E136825 is the UL No. for the Modular Plugs.

Most importantly, for the connectors, we have complete production line, just buy the raw material, and then sell the finished product.

Connector List:

RJ45 8P8C UTP & STP Connector

RJ48 10P10C Connector

RJ11 Connector

RJ12 Connector

110 4 Pairs Connector

110 2 Pairs Connector

110 1 Pair Connector

Different gold thickness are available (50u" & 30u" & 15u" & 6u" & 3u" & flash)

Cat6A RJ45 Connector UTP

Cat6A RJ45 Connector UTP, Cat6A Modular Plug, Cat6A Modular Jack

Ningbo Excellence Communicated Connector Co., Ltd , http://www.patchcordmaker.com