Welding Rod,Welding Rod Price,Best Welding Rods,Tungsten Welding Rod Luoyang Golden Egret Geotools Co., Ltd , https://www.xtc-thermalspray.com
Summer high temperature LCD splicing screen how to heat
In the hot weather, the outdoor LCD splicing large screen is also facing great challenges. The outdoor LCD splicing large screen is a common outdoor display device, and the high temperature weather increases the maintenance difficulty for many outdoor LCD splicing screens. How can we effectively avoid the effects of high temperatures and dispose of it properly? Emperor Aidi Electronics provides relatively effective heat dissipation solutions for LCD splicing panels with an area of ​​20 square meters or less and an area of ​​20 square meters or more.
Below 20 square meters of large screen LCD splicing, due to different temperatures around, Guangdong, north of the place can not use air conditioning, if for insurance, you can use two small fans instead of air conditioning enough. It is also sufficient to install two large-scale fans in high-temperature regions such as Guangdong, Guangxi, Hainan, Wuhan, and Chongqing. The diameter of the fan can be approximately 500mm, depending on the installation space.
More than 20 square cooling <br> <br> splicing screen LCD splicing screen if the installation location is against the wall where you can see the LCD splicing screen projecting how much, if protruding wall one meter, according to recommendations The size of the fan is selected, and the installation position of the fan is sequentially arranged on the side of the screen. For example, the installed LCD splicing screen is an 80-square-P16 outdoor emperor splicing large screen. It is necessary to select six axial-flow fans with a diameter of about 600 mm. Special attention should be paid to ensuring that the fan is pumped out and installed. Protective nets to prevent display maintenance personnel from being sucked in to take care of adult injuries when servicing the display. In addition, it is necessary to install aluminum alloy shutters on the air outlet of the aluminum-plastic panel on the outside to achieve a waterproof effect.
The wall-mounted Emperor Ai Di LCD splicing screen can also be installed air-conditioning, to ensure that the air-conditioning host has a place, does not affect the overall appearance of the wall. The choice of air-conditioning is required. The most commonly used air-conditioning is 1.5P, 2P and 3P air conditioners, and the 12-square-squared 1P air-conditioner calculations in northern cities; the southern cities use 9-square-squared 1P air-conditioning calculations. If the LED outdoor display area is relatively large, air-conditioning will go directly to the manufacturers to customize, if the area is not the case to go to the store to buy, but the display cooling air conditioning is a call compensation function.
If the installation method of the LCD splicing screen is the column, it is best to use a fan to dissipate the heat. The fan is mounted on the back of the large-screen aluminum-plastic plate. It is best to lean upwards and make the shutter form so that the rain does not rain. Enter the display. If it is double-column, several blinds are opened in the middle of the double-column. This multi-industry window is the air inlet, and the upper fan is the air outlet. This results in complete air convection and better cooling effect.
Comments: To prevent LCD screen splicing heatstroke, one is a security issue, the second is the LCD screen splicing screen life. How to better make the liquid crystal splicing large-screen heat dissipation in the summer is a long-term plan to maintain the longevity and maintenance of the LCD splicing large-screen. Emperor Aidi's LCD splicing large screen is equipped with a smart temperature control alarm circuit and features a scientific cooling system, than the general LCD splicing large screen cooling function is stronger, but in order to extend the life of LCD splicing large screen and reduce maintenance costs, Adding cooling tools is also a solution.
Emperor Aidi analysis: How to prevent "heat stroke" in LCD summer?
Every year, some people die of heat stroke in summer, and they suffer more in the south of China than in the north. Summer heat is not only a huge test for people, but for AiDi electronic LCD splicing screen, high temperature is also a fatal hurdle, slight negligence is scrapped, heavy fire is caused, then how LCD splicing screen will not "heat stroke "?