About Silicone Hot Water Bag:
Do you have a hot water bag for winter?Are you prepare it?Silicone Hot Water Bag is one of our silicone products.It's made fda silicone,it's heat resistant,and you don't worry it will hurt you.It have many styles in shape or design,you can give it to your friends as a gift.It's very suitable for girls and we can use if in winter.It's a amazing gift in winter.If you are interested in our Silicone Hot Water Bag,you can visit these fashionable design hot water bag such as Silicone Hot Water Bag,Hot Water Bag,Mini Hot Water Bag,Hot Bag Water,Water Hot Bag,Hot Water Bag Silicon.
Product introduction:
1.Product name:Silicone Hot Water Bag,Hot Water Bag,Mini Hot Water Bag,Hot Bag Water,Water Hot Bag,Hot Water Bag Silicon
2.Place of origin:Guangdong China
3.Color:any pantone color
4.Effect:Any effect according to customer's requirement
5.MOQ:500pcs.
6.Package:1 pcs/opp,customized design is available.
7.Design:Customized/stock
8.Certification:FDA,LFGB,SGS,ROHS,etc.
9.Usage:Use for keep warm
10.Silicone Hot Water Bag photos for reference.
Silicone Hot Water Bag,Hot Water Bag,Mini Hot Water Bag,Hot Bag Water,Water Hot Bag,Hot Water Bag Silicon Dongguan OK Silicone Gift Co., Ltd. , https://www.dgsiliconepettags.com
In recent years, China's titanium dioxide industry has increased several times in productivity, output, and market demand. China's titanium dioxide industry has brought about a boom, while at the same time, the growth of Chinese rutile titanium dioxide production. faster. The selection of titanium dioxide drying equipment is among the key equipments that affect the quality of materials. Based on the material properties of titanium dioxide, the company develops fast rotating flashes based on the advanced equipment and technology from foreign countries. Steam dryer has been successfully used in the drying of titanium dioxide.
Jiangxi Zhongbang Titanium Industry Co., Ltd. ordered a flash dryer for the drying of rutile titanium dioxide. Flash dryer mainly consists of air intake system, heating system, feeding system, drying host, dust collection system, exhaust system, control system and other components. During work, the wet material enters the drying chamber through the screw feeder, and the material meets the hot air rotating at a high speed in the drying chamber. The fine powdery material is moved to the upper end of the drying chamber by the hot air, and the material that cannot be carried falls on the bottom of the drying chamber. Smashed by the bottom of the smashing device, the material is rapidly dispersed, and the contact area between the material and hot air increases rapidly. Under the action of centrifugal force (classification device at the top), the product that reaches the degree of drying and a certain degree of fineness is blown out of the classification device, and the material is rapidly dried in this process.
Flash dryer has the advantages of high technology content, high standardization, environmental protection, safety, low consumption, simple maintenance, etc. On the design structure:
1 The bottom of the dryer is provided with an inverted cone structure, so that the cross section of the drying gas gradually expands from bottom to top, the bottom air flow is relatively large, the upper air flow is relatively small, so as to ensure that the lower large particles are in a fluidized state while the upper one is small The particles are also in a fluidized state, and the hot air is rotated along the vertebral body to increase the bottom wind speed, shorten the length of the cantilever part of the agitator shaft, increase the safety and reliability of operation, and enable the bearing to be placed outside the machine to effectively prevent the bearing from being exposed to high temperatures. Area work to extend the life of the bearing.
2 The scraper is set on the stirring teeth, and the material is thrown toward the wall at the same time as the material is being crushed by the stirring teeth, and is adhered to the wall surface. If it is not scraped off in time, the equipment may vibrate in severe cases and even cause the stirrer not to turn . A scraper is set on the stirring teeth, so that the material sticking to the wall can be peeled off in time to avoid sticking the wall.
3 The number of rotations of the stirring shaft is controlled by a stepless speed-regulating motor. According to the product particle size requirements to choose different speed, the faster the speed of the stirring shaft, the smaller the particle size of the product.
4 The classifier is installed in the upper part of the dryer. By changing the hole diameter of the classifier and the height of the classifying section, the air flow rate can be changed to control the size and quantity of particles leaving the dryer, the final moisture content, and the residence time of the material in the drying section.
5 Feeder screw conveyor speed is controlled by the inorganic speed motor. The feed rate is controlled according to the material properties and drying process parameters.
6 The equipment has a compact structure, a small footprint, and integrates drying, smashing and grading. It is an organic combination of swirling technology, fluidization technology, spouting technology and convection technology. It does not need to be crushed and sieved after drying, simplifying The production process saves power and equipment costs.
As a new type of equipment, flash drying has been widely used in the titanium dioxide industry in recent years. Currently used in the titanium dioxide industry is the commonly used model 1400, 1600 flash dryer, which can meet the quality requirements of titanium dioxide. In the titanium dioxide industry, the company will continue to adhere to scientific and technological innovation, and constantly improve the company's innovation capabilities, and continuously strive for the sustainable development of the titanium dioxide industry and the drying industry.
