Analysis of the Mechanism of Wear of Pumping Pumps and Discussion on Solutions

Analysis of the Mechanism of Wear of Pumping Pumps and Discussion on Solutions
Core Tips: Discussion on the analysis and solution of the wear mechanism of the pumping pump Bu Fanjian (The Shengli Oil Production Plant of Shengli Oil Field Company, SINOPEC, Dongying 257051, Shandong, China) The control measures of grinding performance, sand formation prevention and sand injection prevention as means, and Explained some specific methods and their applications to solve the problem of pumping
The analysis of the wear mechanism of the pump and the discussion on its solution Bu Renjian (The Shengli Oil Production Plant of Shengli Oilfield Company, SINOPEC, Dongying 257051, Shandong, China) The management measures of grinding performance, sand prevention in sand formation, and prevention of sand pumping as the means, and expounded some The specific methods and their applications provide technical support for solving the problem of wear of the pump.
With the late stage of the oilfield, especially after entering the extra-high water cut period, the pump efficiency problem of the oil pump becomes more and more important. A prominent problem in the production for a long time is that due to the destruction of the formation cementation, the crude oil contains sand scum, which leads to the wear of the inner wall of the pump plunger or pump cylinder, and the short-term loss of the pump, resulting in a rapid drop in fluid production. Short-term failure of Shengtuo Oilfield (

Horizontal Glass Washing Machine
Horizontal Glass Washing Machine used for cleaning and drying the upper and lower surfaces of ordinary plate glass and high quality low-e glass,it is composed of incoming segment, cleaning air-drying segment and outgoing segment.

1.Aluminum alloy assembled structure, no scrap concept, permanent use,high efficiency, energy saving 70% efficiency;

2. The rest of the sheet metal parts are sprayed with advanced mechanical paint or powder

3. The shaft of rubber roller is made of stainless steel

4. The washing part in contact with water is made of stainless steel

5. Cleaning department, wind staff overall lift, the maximum lift: 350mm,easy to clean and maintain

6. Three pairs of brush(Ã˜150mm)Stainless steel shaft configuration (low-e glass, ordinary coated glass and sunshine coated glass can be washed without damaging the coated surface);

7. Two pairs of special stainless steel aluminum alloy air knife configuration, strong wind, good air drying effect, with heating system(with temperature control device, optional opening and closing);

Horizontal Glass Washing Machine,Flat Glass Washer,Automatic Glass Washing Machine,Custom Glass Washing Machine
JINAN KATION TRADING CO.,LTD , https://www.machinerychinese.com